Sactownbully84 Posted April 21, 2010 Report Share Posted April 21, 2010 well i have been on SMD for a while now and i decided to join the big boy club and make me a build log since i have a 18" BTL in this bish now. The Cool part bout this is before this setup i had a 12" FI SSD in a lil prefab on a Hifonics bxi1610. and from there i traded my way up to a 12" BTL fully loaded and from there to the 18" BTL. I sold the bxi1610 to get the XXX-4000d and i then got two stinger SPV70's and a dc power 260SP. Then i got a XS Power VCM. first up is a lil bit of the BTL 18" then the box build. The Box Was Built By Cody @ CC_AUDIO Box Build This is my work, on painting the ports, i got the primer laid and the stone paint laid on the SPL port will post more later when i wrap the box in carpet and im gonna paint the daily port also same as the SPL port with the stone paint. Let me know what you guys think, and give me sum idea's. Thanks for Lookin PS. Check out my youtube channel for earlier builds on the Grand Am. My Youtube Channel Quote 2001 Grand AM Pioneer UB4000 HU Tsunami / Monster Wire's DC POWER INC 260SP ALT w/ XS Power VCM BIG 3 All 1/0 Monster 400 + YT Under Hood Stinger SPV70 x2 in Trunk 4x SA-10's On There Way soon i hope SS XXX-4000D @ .7ohm 3K+ RF Power 4x6's & 6x9's Monsoon Powered PG TL22 Line Driver 148.7db @ 35-45hz sweep w/ 12" BTL Link to comment Share on other sites More sharing options...
cc_audio Posted April 21, 2010 Report Share Posted April 21, 2010 Even though I've seen them, I wanna see pics of the amplifier and your electrical. And I really want to see a video. Install that port already, gotta make sure it works too. Did you want me to host the build pics here since their already on my photo bucket account? Quote It's all gone! The Celica Build Feedback If I buy something from you, DO NOT USE FEDEX! Link to comment Share on other sites More sharing options...
Sactownbully84 Posted April 22, 2010 Author Report Share Posted April 22, 2010 Even though I've seen them, I wanna see pics of the amplifier and your electrical. And I really want to see a video. Install that port already, gotta make sure it works too. Did you want me to host the build pics here since their already on my photo bucket account? yeah cuz when i tried to, SMD said it was too many photo's. i will make another vid of it tomorrow in action, prolly put that SPL port in also n give it a whirl. here is a vid of the BTL in action...this is with my gain waaayyy down cuz i was messin w/ my line driver and after i made this vid i realized my PG TL22 wasnt running so i will make a new vid tomorrow of both ports so everyone can see the difference. here is a few pics of my SS XXX-4000d Quote 2001 Grand AM Pioneer UB4000 HU Tsunami / Monster Wire's DC POWER INC 260SP ALT w/ XS Power VCM BIG 3 All 1/0 Monster 400 + YT Under Hood Stinger SPV70 x2 in Trunk 4x SA-10's On There Way soon i hope SS XXX-4000D @ .7ohm 3K+ RF Power 4x6's & 6x9's Monsoon Powered PG TL22 Line Driver 148.7db @ 35-45hz sweep w/ 12" BTL Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.