boys from oklahoma Posted June 16, 2010 Report Share Posted June 16, 2010 10.09277 before anything 8.76407 after port (1.32870 ft³) 8.44407 after subs (0.32 ft³) 8.366524 after supports (0.077546 ft³) 2.091631 per sub ft³ leaving it tuned @ 32~33 hz correct? it was 8x8x10 and some one said that wasnt enough for how many cubes that are in the box this is a quick drawing i just did so i could figure the port and shizz but the box is 17.75H x42W x28D and the top of the port is 14*8 and the overall length is 20.5 inches if i am correct.... i think i got it right but if some one sees an error in my calculations lemme know please and this would be the port cutouts Subs: 4 Rockford Fosgate Power T1 dual 2ohm Amps: 2x alpine mrd-m1005 <--(for sell or trade) rockford 250.2 Speakers: rockford punch 4way 6x9 in doors rockford power 3 way 6x9 rear in boxes dual alts dual batteries 2/0 wiring 300 amp rf fuses Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.