Chamois Posted August 30, 2010 Report Share Posted August 30, 2010 if you invert the sub and have an external aeroport then you can still keep that volume Thats true, But this box already has a slot port on it .. He can still invert the sub, and gain a little more area .. But that box is plenty big enough for his sub, i dont see any issues with it working fine .. Quote 2006 Saab 9-3 2.0T Link to comment Share on other sites More sharing options...
memphisbasshead Posted August 30, 2010 Report Share Posted August 30, 2010 Thats true, But this box already has a slot port on it .. He can still invert the sub, and gain a little more area .. But that box is plenty big enough for his sub, i dont see any issues with it working fine .. he should have somewhere around 1.6-1.9 cubic ft after displacement Quote My Car Audio Setup: Sub: 1 RE Audio HC 15 Dual 2 ohm(soon to get a psi recone) Daily Sub Box: 1.62 cubes net with 2 dayton audio 8 inch passive radiators tuned to 34.35 hz, 141.9 @ 48 hz sealed on the dash with termlab Competition Sub Box: 3.10 cubic ft. net tuned to 50.58 hz with 2 6 inch aeroports, 147.9 @ 62 hz sealed on the dash with termlab Amp: Powerbass ASA 1000.1 Dx(eventually gonna get a planet audio bb2400.1) Big 3: Phoenix Gold 1/0 Gauge Amp Wire: Knukoncepts 1/0 gauge Alternator: Stock 90 amp Battery Under the hood: Autocraft Gold Top Battery Battery In Back: None for now but I am looking for one so pm me if you have one for sale HU: Pioneer DEH-2900MP Front/Rear Amp: Hifonics Txi-4408 4 channel amp Front Speakers: Orion Cobalt 6.5 coaxial Rear Deck Speakers: Orion Cobalt 6x9 coaxial Home Audio Setup: Speakers:2 Cerwin Vega D-3's (10" Woofer,5 1/4" mid-range,1" Bullet Dome Tweeter) 2 Cerwin Vega D-5's (12" Directed Audio Xtreme 124SX Subwoofer,5 1/4 mid-range,1" Bullet Dome Tweeter)Kenwood center channel and rears. Amp: 2 Kenwood KM-105's from 1985 Receiver: JVC RX-6008V 5.1 Channel Receiver Pre-Amp: Kenwood KC-993 Sub: still looking for one thinking about getting a 18 or 15 for my sub to hit the lows if anyone has one pm me I do free box designs if anyone is interested Link to comment Share on other sites More sharing options...
Chamois Posted August 30, 2010 Report Share Posted August 30, 2010 (edited) he should have somewhere around 1.6-1.9 cubic ft after displacement He should have posted the exact port width and length .. That woulda helped a little bit to figure out displacement and exact box volume Edited August 30, 2010 by Chamois Quote 2006 Saab 9-3 2.0T Link to comment Share on other sites More sharing options...
Edgar1428 Posted August 30, 2010 Author Report Share Posted August 30, 2010 the measurements are outside diameter not inside. cubic feet is even less because the wood is doubled(if thats what its called?) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.