J-Squared Posted November 19, 2010 Report Share Posted November 19, 2010 Hi guys. I kind of need help on my 4th Order box design. I have the design I want, and I had the basic dimensions, but I can't figure out the port. I know that each of the chamber's for them will be 1.5ft3 and that the vented section will be about 6ft3, but I'm not sure how to design the port. The box will be for 4 DC XL 15's, and the port can't be any taller than 14.5inches, because it will be in a blow through, through the back window of a 92 S10. I would like the box to be tuned to about 38hz. The box can be no wider than 55 inches, because that is all there is between the bed rails. And the box will most likely be on a stand in the bed, so that it goes straight and through the window. Any help is greatly appreciated, and if you have any questions please ask. Thanks! J-Squared My Build Log Deck- Eclipse 3100 Subs- 2X DC XL 18's Wiring and Fuses- Stinger and Monster Cable Sub Amp- Sundown SAZ 1500 V.2 Speaker Amp- Coustic 360U Alternator - Powermaster Alt. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.