Plans for Ported Enclosure

[ssj92]

I was wondering if someone can help me draw out plans using paint or something for a slot loaded enclosure. I currently have a sealed one and want to try ported.

I got two Rockford Fosgate T1s (T110D4s).

Displacement for each is 0.065.

Rockford Fosgate recommends around 3.34 cubic feet.

I want to tune it @ 32hz.

Car is a 1998 BMW 323i (E36 Series).

I'm limited to around 16" height, 40" width, and 13" depth. (Will double check tomorrow)

Some specifications of the woofers:

DC Resistance (Re): 6.2 Ohms

Voice Coil Inductance: 4.6 mH

Resonance Frequency (Fs): 36hz

Mechanical Q Factor (Qms): 5.68

Electrical Q Factor (Qes): 0.67

Total Q factor (Qts): 0.60

Cms: 1.15E-04 m/N

Vas 0.558 FT^3 (15.8 liters)

Mms: 5.82 oz (164.9 g)

Rms: 6.67 kg/s

SPL: 82 db

BL: 18.0 T-m

X-MAX: 0.55" (14mm)

SD: 48 in^2

PE: 600w RMS/1200w Peak

EBP: 54