craniumcrackinbassv2 Posted January 3, 2011 Author Report Share Posted January 3, 2011 there's no oint in that, those little pieces of metal screw off and theres a bar that i cant remove on top....ill take a pic so i can show you. Quote Link to comment Share on other sites More sharing options...
Slapuhho Posted January 3, 2011 Report Share Posted January 3, 2011 Foam Foam Foam! Quote 4 18's, low power and lots of gay fur. Team gg Team DOA My Videos Link to comment Share on other sites More sharing options...
craniumcrackinbassv2 Posted January 3, 2011 Author Report Share Posted January 3, 2011 Quote Link to comment Share on other sites More sharing options...
craniumcrackinbassv2 Posted January 3, 2011 Author Report Share Posted January 3, 2011 ok so the carpet has been striped, let me know what you think. Quote Link to comment Share on other sites More sharing options...
keepinitloud Posted January 3, 2011 Report Share Posted January 3, 2011 I'd say you have plenty of room get to work you will need to mount the box in place and any space you have left should build wood panels to fill in the gaps then seal with foam let dry any excess pokin out use a razor to cut smooth the package tray need to be sealed and some sort of sound deadner used over it as well then carpet for good looks Quote 06 chrysler 300C Hemi one mmatts dreadnaut 15 powered by a planet audio vx 2200d fosgate p200 running planet audio 8" midbass drivers and super compression tweeters stock battery and a stinger spv44 Irragi 300 amp alternator big 3 1/0 http://www.stevemeadedesigns.com/board/topic/55075-system-in-my-300c/page__view__findpost__p__763656__fromsearch__1 Link to comment Share on other sites More sharing options...
craniumcrackinbassv2 Posted January 4, 2011 Author Report Share Posted January 4, 2011 alright. everything is all measured up and ready to go, but what are the steps in doing so? i have a few questions before i start this build. #1 will my stock speakers that are in the back need to be baffled? #2 will i have more bass than if i were to just say face the subs back and the port back? #3 what are the pros and cons of facing them forwards? #4 since this is the first system that im doing alone is this one that you guys think is too much for me? since i have no install experience. i have a few more so if you can please help me out that would be greatly appreciated! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.