Jeep03 Posted July 13, 2014 Report Share Posted July 13, 2014 So I think my sundown 3500v2 is done. This morning i got in my jeep and my amp when straight into protect mode. I figured eh ground came lose ill fix when i get home. I fixed it sand it down and still same shit. So I pulled the RCA's out and still same thing. Disconnected the speakers and still the same shit. So now im thinking well fuck its the amp. I have a 2400 hifonics so i swapped it. Put the power and ground with remote and it turned on fine, no protect mode. put the rcas in and still on. Put the speakers on and the bass started to bump. What do I do now? I then connected the sundown 3500v2 and still the same thing with the power ground and remote connected. I've only had this amp for like 4 months~ Link to comment Share on other sites More sharing options...
evermaxx Posted July 13, 2014 Report Share Posted July 13, 2014 open it up. see if its burnt anywhere. Team Subsonic Lows Get your garbage EMF products of my amp bitch Man....it makes a nice work bench Link to comment Share on other sites More sharing options...
Jeep03 Posted July 13, 2014 Author Report Share Posted July 13, 2014 I'll have to pull it out tomorrow. Its under my seat. Its never gone into protect mode. I'm not sure how Sundown warranties there amps. lol Link to comment Share on other sites More sharing options...
OrionStang Posted July 13, 2014 Report Share Posted July 13, 2014 Are you the original buyer? If so, don't open it up until you speak to somebody from Sundown. SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
Jeep03 Posted July 13, 2014 Author Report Share Posted July 13, 2014 yea original buyer bought it on amazon. Link to comment Share on other sites More sharing options...
OrionStang Posted July 13, 2014 Report Share Posted July 13, 2014 I'd contact Sundown before anything. SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
Call Me Dubstep Posted July 13, 2014 Report Share Posted July 13, 2014 Maybe Components overheated, and caused damage, due to the amp being under your seat with lack of air flow, Just my thought. 2000 Ford Focus ZX3 Mods: Raceland Coilovers Borla Exhaust Aftermarket Header System: Sony CDX-GT66UPW Pioneer 6x8's System Upgrades : Pioneer MVH-X560BT 2 sets of Rockford Fosgate P1683's Fi Audio Q 18" D2 ( Currently Own) DD M1C ( Currently Own) All SHCA Wires and stuff... XS Power 4800 ( Stock Replacement) High Ouput alternator (undecided which company or Amperage.) Link to comment Share on other sites More sharing options...
Jeep03 Posted July 13, 2014 Author Report Share Posted July 13, 2014 yea it was under my seat but I always had the ac running to the lower of my feet with the windows down to try and keep it cool. I'll look into making a small fan for it now. I'll go ahead and call sundown tomorrow. Still got the original packaging and what not too. Link to comment Share on other sites More sharing options...
martydmb Posted July 13, 2014 Report Share Posted July 13, 2014 What impedance where you running? 05 dodge magnum rt DEH-80PRS Rockford fosgate T600.4 st200 tweeters Sundown Neo Pro 6.5 v2's 2 Saz-3500v2- Toolmaker dual 1/0 inputs 2 Sundown ZV4 12" D1 1/0 Sky High Power wire OFC 3 XS D3100- Toolmaker battery terminals Mechman 320 Amp Alt Smd Voltmeter KnuKoncept 1/0 OFC Link to comment Share on other sites More sharing options...
Jeep03 Posted July 13, 2014 Author Report Share Posted July 13, 2014 wired to 1ohm Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.