Thumpper Posted April 28, 2009 Report Posted April 28, 2009 I had a few of these pics in my enclosure build thread but I thought a seperate thread for the system install was needed anyways..................................... http://www.stevemeadedesigns.com/board/public/style_emoticons/default/hairtrick.gif Something I have wanted to do for a while now.....a Quad 15" Ground Pounder here is the equiptment list 1 1998 Ford Windstar ...white body with all dark tinted windows,grey interior with the 240hp V6...only 127,000 k on the drive train..very good shape 1 Premier 980BT head unit 2 pairs JBL 660gti components 2 JBL GTO 75.4ll amps for the components ( 290w rms x 4 ) 4 *** junk 15" subs 1 JBL/Crown A3000gti amp for the subs ( rated at 3200w rms...YA OK WHAT EVER ...LOL ) all wiring will be Tsunami plus a bunch of other crap I'll work on it and add pics as I go..... My Install
Thumpper Posted April 28, 2009 Author Report Posted April 28, 2009 here is some of the stuff..... My Install
Thumpper Posted April 28, 2009 Author Report Posted April 28, 2009 I don't have enough time for the step by step pics so I'll throw in what I can.... the rats nest.......a Compustar 2 way all connections silver soldiered and heat shrinked...""""NO CRIMP CONNECTORS"""" all wiring harnesses are cut to length and loomed except fot the obne needed for the Microwave Sensor..it will be done when the encllsure and amp rack are installed deck installed (Premier 980BT) the alarm LED is under the cig lighter.... My Install
Thumpper Posted April 28, 2009 Author Report Posted April 28, 2009 finally ........here is all the amplification 290w rms x 4 @ 4ohm for the components and what ever that 80lb thing is rated at for the subs My Install
Thumpper Posted April 28, 2009 Author Report Posted April 28, 2009 Tiss is slow going...very little time between the kids and the customers builds time to give those JBL 660gti components a new home My Install
Thumpper Posted April 28, 2009 Author Report Posted April 28, 2009 these doors are not the same size...... anyways............. My Install
Thumpper Posted April 28, 2009 Author Report Posted April 28, 2009 these irregular door panels were a bit of a challenge....all worked out though My Install
Thumpper Posted April 28, 2009 Author Report Posted April 28, 2009 a little test fit.................everything fits really good , no loss of legroom at all now it's time for some glassing My Install
Eric B Posted April 28, 2009 Report Posted April 28, 2009 looks like a nice clean start!!! 2007 Chevy HHR LT UNDER CONSTRUCTION 1st Place Loud N Low 2010 MWSPL Finals 3rd Place Xtreme 3 2010 MWSPL Finals
Recommended Posts
Archived
This topic is now archived and is closed to further replies.