Browne

Can it be that the output on idle is just very low? that what the alt say's its giving?

Its Actually a 2004 Ford Explorer

Can a BAD Fan Belt cause low voltage on idle?

at the stock bat...and i also have a voltage meter inside the jeep...The AudioControl EPIC160

Without the Kinetik i was reading 13.5 or sumthing like that wen reving.... neva tried the hc2400 alone....buh i kno wen i first got it it read 13.0volts out of the box

wen i rev it reads about 13.9 - 14.0 sumtimes 14.2volts

Yes i have a 200amp ALT

I have a serious Voltage Problem....my voltage sits at 12.5 on IDLE :S i have 2 batteries install a HC2400 n my stock battery.with engine off about 11.9-12.0 volts Do i need more batteries still?

awww man this sucks!

all my wiring is fine. I tried the amp in another vehicle n its doing the same thing. It still cuts out wen volume is increase :S

Well its not the speakers cause i also tried other speakers, my grounds are good i checked them already, the only thing i did check was the remote i'll check it now and get back to yall .... i'll also try the amp in another vehicle

Well I also have a ROckford T20001BD in the jeep and that does not cut out

I have to runs of 0guage positive and negative. ground comes straight from the Battery and the gain is on half and i use the amp for Mids not bass

Just got my Rockford P550.2 amplifier and its giving me problems :S....wen i increase the volume on the deck the amp cuts out. The power light stays on the protection light doesnt come on neither dis the thermal light. Can someone explain to me why this is happening???

Thanks Alot! ..........Is it possible for me to use a controller?