Jump to content

Browne

Members
  • Posts

    69
  • Joined

  • Last visited

Everything posted by Browne

  1. Can it be that the output on idle is just very low? that what the alt say's its giving?
  2. Can a BAD Fan Belt cause low voltage on idle?
  3. at the stock bat...and i also have a voltage meter inside the jeep...The AudioControl EPIC160
  4. Without the Kinetik i was reading 13.5 or sumthing like that wen reving.... neva tried the hc2400 alone....buh i kno wen i first got it it read 13.0volts out of the box
  5. wen i rev it reads about 13.9 - 14.0 sumtimes 14.2volts
  6. I have a serious Voltage Problem....my voltage sits at 12.5 on IDLE :S i have 2 batteries install a HC2400 n my stock battery.with engine off about 11.9-12.0 volts Do i need more batteries still?
  7. Browne

    Amp Problems

    awww man this sucks!
  8. Browne

    Amp Problems

    all my wiring is fine. I tried the amp in another vehicle n its doing the same thing. It still cuts out wen volume is increase :S
  9. Browne

    Amp Problems

    Well its not the speakers cause i also tried other speakers, my grounds are good i checked them already, the only thing i did check was the remote i'll check it now and get back to yall .... i'll also try the amp in another vehicle
  10. Browne

    Amp Problems

    Well I also have a ROckford T20001BD in the jeep and that does not cut out
  11. Browne

    Amp Problems

    I have to runs of 0guage positive and negative. ground comes straight from the Battery and the gain is on half and i use the amp for Mids not bass
  12. Browne

    Amp Problems

    Just got my Rockford P550.2 amplifier and its giving me problems :S....wen i increase the volume on the deck the amp cuts out. The power light stays on the protection light doesnt come on neither dis the thermal light. Can someone explain to me why this is happening???
  13. Thanks Alot! ..........Is it possible for me to use a controller?
  14. oh ..kool koool.... the mechanic was telling me that i can use a Turbo Timer to increase my idle wen ever i want. But i was like to my self Turbo timer in an non turbo vehicle :S how does that work?!?
  15. This ford explorer is Running Electronically.....so there is no screw by the throttle body the last time i check
  16. Hey there, I have a 04 Ford Explorer and i was wondering if there is some way i can increase the idle by some sort of controller with out steping on the gas pedal or getting the mechanic to increase it via computer and keep it at a steddy rpm
  17. this is a new system i'm doing. I setting up a 2004 Ford Explorer
  18. ok ok kool kool....what do you think about the Ma audio 1800watt RMs amp?
  19. Hey i looking for a 0.5ohm stable amplifier to run a SPLW-15 inch subwoofer. can sumeone help me find one please
  20. it sounds much better....but the old box wasnt sealed...the ports were at the side....
×
×
  • Create New...