Jump to content

greg4510

Members
  • Posts

    164
  • Joined

  • Last visited

Everything posted by greg4510

  1. Sorry couldn't figure out the phone. Like I say I been swamped at work and I'm just checking the forums. I have an apex 320 alt ordered so I'm going to see if that will help hold a steady voltage and I'm going to add more grounds in the back. So that will be 2 2/0 power from each alt and 1 2/0 grounds from each alt going all the way back. And then I have 3 frame grounds going to the lithium bank
  2. Yea I'm sorry joe x. I been sort swampedwith work and I'm just getting around to Cheviot the forum. 12.5 or you would be having issues with the full bridge amps.
  3. Yea that's my only concern is how will the truck electrical handle 15.2-4. I know the 120ah bank may not be enough reserves but was hoping that the dual alt would at least recharge fast enough to maybe keep up until I can add another 80ah bank
  4. Okay with that being said which one would you buy and start with first. I can't afford to do both at the same time. The 80ah bank would cost me about 850-900. The apex alternator would cost my about 399 with the bypass plug I need.
  5. Hey guys I have an 07 Cadillac escalade with a cpillar flat wall. 4 avatar stu 1546 subs on 2 taramps md12k. They are the 1 ohm version wired at .07. I have dual atl setup up front. Stock alt for just cranking the truck and an apex 320 running xs power 120ah yinlong bank. They are completely separate so the apex can charge at 15.2. My issue is when I really get on my bass the voltage will drop from 14.8-9 to 12.5-8 at full tilt. My question is do I add maybe 80ah more bank or do I take out factory alt and add another apex? Only downside is the escalade has that rvc crap that turns down the voltage through the computer.
  6. Hey guys I have 4 avatar stu-1546 dual 2 ohm in a c pillar flat wall in a 2008 Cadillac escalade. I need help choosing amplifier power. I'm stuck between 2 taramps md 12k and 1 soundigital 35k. I don't know much about the 35k but I've used the md12ks before. My subs read .7 ohms per pair so I was going to run 1 ohm version of 12ks. Or parallel the subs and run the 35k at 1.40ohm. My electrical is a 320 amp alt and 160ah xs yinlong bank
×
×
  • Create New...