daddy_j

Sorry but you do not have the minimal of 150 posts to sell here. -Chode

Who doesnt let you run quads, if you dont mind me asking? just asking, cuz I running 2 15Q1, on 2 mojo 4000.1s. I would hate to get disqualified. Thanks in advance.

pics

I have two 2400 kinetiks and I would like to trade them for three 16 volt kinetiks. I see the 16 volt ones go for as little as $130 ea and the 2400s go for no under than $180. I have pics if needed. Let me know what you have in mind. Thx. I have an epic 160 to sweeten the pot. looking for 16volt batteries ONLY, not looking to sell mine, just trade for 16 volt batteries.

to complicated for me. I used wood glue, liquid nails, and a shit load of screws. I made the hole for the aero ports, now I just have to put the sub in and the port. Then after that start tuning.

looks just like the boxes I just made. And thanks for the pics. I didnt know where to put the ports. I see that they are right in the middle. I was gonna buy a 4.5" circular cutting drill (name of tool unknown) but they wanted $33. I could only see using it one freaken time. So instead Im trying to use the jigsaw to make the 4.5 inch hole. I couldnt figure out how to order the aero port. I didnt know if I had to buy (2) 15.75 piece and then the four ends or does the two ends for each come with it? I instead bought (2) 4inch PVC at 2 feet long. And Im gonna cut a half inch at a time till I peak. Once I hear the vehicle and get it where it needs to be, then I'll order the areo ports, by then maybe I could figure out what it is exactly that I need. Thanks everyone.pics coming soon. I'll post in a new thread.

thanks for the new numbers, everything fit together nicely.

Im not trying to call anyone out or anything, but I went and spent $27 on the mdf and getting the wood cut, to the above numbers and I get them home and I cant put the puzzle together.Can you plz look at the above numbers and tell me that they indeed fit. I think your cut list might just have screwed me up. Can you plz recheck your numbers. Again not trying to insult anyone, but I have tried ever possible way to put the pieces together but there is always an opening. . Plz tell me Im wrong, I dont have my circular saw and wont be getting it back for a while. Jig saw = crooked lines.

just now. what is a T-line ? I plan on building the box above. but plz throw out any suggestions, plz and solox18 its cool, and thx for the input.

who uses rms? if you read my post, this is for spl only. not daily driving. rms is mostly for daily. I just went to the site and I will be getting (2) 4" at 15inches long. I'll try 10 inches, meter it then start cutting 1/2 at a time. thanks. rms=lol

cant I use pvc pipe? i was thinking about the flared ports but if the port is on the outside, it cant be flared.

thank you so much for your help. I will build these boxes startin tomorrow.