daddy_j

Sorry but you do not have the minimal of 150 posts to sell here. -Chode

Who doesnt let you run quads, if you dont mind me asking? just asking, cuz I running 2 15Q1, on 2 mojo 4000.1s. I would hate to get disqualified. Thanks in advance.

pics

I have two 2400 kinetiks and I would like to trade them for three 16 volt kinetiks. I see the 16 volt ones go for as little as $130 ea and the 2400s go for no under than $180. I have pics if needed. Let me know what you have in mind. Thx. I have an epic 160 to sweeten the pot. looking for 16volt batteries ONLY, not looking to sell mine, just trade for 16 volt batteries.

to complicated for me. I used wood glue, liquid nails, and a shit load of screws. I made the hole for the aero ports, now I just have to put the sub in and the port. Then after that start tuning.

looks just like the boxes I just made. And thanks for the pics. I didnt know where to put the ports. I see that they are right in the middle. I was gonna buy a 4.5" circular cutting drill (name of tool unknown) but they wanted $33. I could only see using it one freaken time. So instead Im trying to use the jigsaw to make the 4.5 inch hole. I couldnt figure out how to order the aero port. I didnt know if I had to buy (2) 15.75 piece and then the four ends or does the two ends for each come with it? I instead bought (2) 4inch PVC at 2 feet long. And Im gonna cut a half inch at a time till I peak. Once I hear the vehicle and get it where it needs to be, then I'll order the areo ports, by then maybe I could figure out what it is exactly that I need. Thanks everyone.pics coming soon. I'll post in a new thread.

thanks for the new numbers, everything fit together nicely.

Im not trying to call anyone out or anything, but I went and spent $27 on the mdf and getting the wood cut, to the above numbers and I get them home and I cant put the puzzle together.Can you plz look at the above numbers and tell me that they indeed fit. I think your cut list might just have screwed me up. Can you plz recheck your numbers. Again not trying to insult anyone, but I have tried ever possible way to put the pieces together but there is always an opening. . Plz tell me Im wrong, I dont have my circular saw and wont be getting it back for a while. Jig saw = crooked lines.

just now. what is a T-line ? I plan on building the box above. but plz throw out any suggestions, plz and solox18 its cool, and thx for the input.

who uses rms? if you read my post, this is for spl only. not daily driving. rms is mostly for daily. I just went to the site and I will be getting (2) 4" at 15inches long. I'll try 10 inches, meter it then start cutting 1/2 at a time. thanks. rms=lol

cant I use pvc pipe? i was thinking about the flared ports but if the port is on the outside, it cant be flared.

thank you so much for your help. I will build these boxes startin tomorrow.

site says net displacement 311.04 cubic inches 5100cc equivalent volume(vas) .702 cubic feet thank you so much. hope that helps.

I did tell kicker and they said 6cubic feet. this is only for SPL nothing more. and the 10s and 12s used the same glue. if you throw more than 5000watts at 1 for more than afew seconds you'll see them smoke. They are great burpers, but for daily and 5000watts= smoke. This is the 3rd and fourth spare.

all solox woofers start to smoke. thats just the glue they use. I will add more deadening and get rid of the sun roof. But the thread was for help on a box not weather or not I need to get rid of my sun roof. Plz if you have info on my box I would LOVE your input. plz dont state I need more batteries or anything else. again no disrespect to anyone. plz help with the box situation. So if I build the 1cubic foot box is that before displacement? that is what Im planning. and where does the port go. in the corner, in the middle, top of the back, bottom of the back, same on the other box? thx

thank you for your info, the reason I have the SS10000d is because I got a good deal on it $700shipped. I had 2 phd5000d ampsand just switch the amp and gained 2dbs. The solox10s cant take anymore power than a SS10000d on 12volts. After 25seconds (SB1) they start to smoke, and after the 30seconds the car is full of smoke. So 5500watts is pretty much all they can take. I will put them in a 1foot box and witht the port you sugested, thanks. BUt any chance of you being able to figure out how I end up with 1 cube after the sub and port displacement? Like how big would the box have to be after its all said and done? I know most people on this site are busy, but if anyone can find a spare moment to draw up such a box, or maybe give me the outside dimentions, that would be great. I know 12X12X12 is 1 cube, but not when the sub is in there. thanks everyone for reading this thread, not just the ones that chime in, but the ones that dont write crazy stuff. I have the 89 crx with a sun roof. I am not prepared to compete against the big dogs yet +155dbs, that is why I dont want to run 16volts yet. once I get to about 152dbs, then I might go 16 volts. remember this is straight spl. mounting depth of the sub is 8-3/8in, 21.1cm I don't know what this means but FB=70.4hz, f3=40.9 exmass .906in 23mm Stupid kicker tells me to build a 6cubic foot box for each sub, for spl. Crazy basterds.

Ok here we go, I have built three boxes and and modded them as much as I could before destroying them. I have tried 1.5 cubes per, and 2cubes per, and even 2.5cubes. Now I need the advise from the pros. I have a SS10000D, and 2 solox10s dual 2ohm (.5 ohms altogether). My vehicle is a 89crx and is strickly a comp car. Not wanting it to sound good, just straight SPL. Just burping, or an occational 30second burps. The tuning can be where ever you think will hit the hardest in a crx. This is for Usaci events with the door open and mic on the passenger floor. I dont really want to wall it off because that would put me in a mod class with the sponcered guys who are hitting +155dbs. I just can't seem to get the port tuning right. My highest to date in the crx with the equipment listed above is 149.2dbs, and then I started messing with the port and have only been going down ever since. Yesterday went all the way down to 147.6dbs. So as you can see I need help. I will take every responce into consideration. So please help with a design. I also have 4 2400kinitiks. Just really asking for a box recomondation. I have no preference. Subs up, down, left right, ports up, down, left right, two chambers, one chamber, 2boxes or one box, it doesnt matter. Please help. Usable space in the crx is 14.5 inches tall, 32inches wide, and 40 inches length. But the 40 inches wont leave room for the ports to breath. I know there are alot of pros on this site that have delt with either a crx or solox10. thanks to anyone who took time to read the whole post sorry its so long. But I want you guys to see that I am trying on my own, and not just paying for everything with mommy and daddy's money. thanks

finally all gone

finally all gone

How about 2 of them for my phd5000d amps, and a few bucks on my end?

Thats for the pair shipped. I just bought a SSS10000 and I need to make some of the money up. Thanks every1.

to the top you go.