05accord6spd

So to open the topic back up. Talked to sonic and they didn't want to give me a free return label. Untill I told them it was confirmed by nvx and Tony himself that it does not work with the dd1. After that I said I also gave email stating this from nvx and this topic showing there's no way to truly confirm sonics dyno test and asked if they wanted to see it. Got a very Stern no thanks. Doubt they want anyone to know lol. Also the girl said sonic is nvx. Is this true?

Well my first post was a banger on here over 80 replies. Thank again Tony! Def returning myn not messing with it and getting the ts1.3 tonight

If this ts1.3 isn't good I still will probably return the jad

So return the amp then ? Is it garbage?

So nvx says there is a problem with dd1 and Tony says there is not. Soooooo let's get nvx or tony to validate there claims

Probably have ground problem I gotta fix

And my cobalt puts a min of 13.3 to the amp and hangs out around 13.8

I tuned myn with 40hz voltage hitting 40 for 800w at 2ohms and the amp is hot and the sub warm so I've tried my hand at tuning it

Does he think nvx answer is bs then ?

Tony ? So he's never heard of any dd1 not working on particular amps ?

Think I could find used stuff better quality for same price so. But if the amps true on the clames I'd keep it

Eh I'm in between returning everything i bought and keeping everything lol

Anyone recommend a good amp around same price that does 1200+ @1ohm? Basically the reason why I bought it so :L kinda upsetting

Still don't get how sonic electronics came to the results this amp does 1300+ @ 1ohm if the dyno doesn't register distortion??? Fairly sure nvx and sonic owe me a explanation.. they have sold a shit load of these amps and no one seems to know about the dd1 problem

This amp seems to be the same as the Polk audio 1000.1 wonder if that amp does the second thing. And I wonder who truly makes the amp. Could call and ask them if I knew

Yea they replied in email and all they had to say was tune it by ear and the chip makes it not work with dd1 :L same thing said over the phone.

Would be cool if he chimed in I can call nvx again and ask for a video tkmorrow

Some one get Tony in here because the guy I talked to 100% said sonics video is true and that means thus is probably the best value amp on the market in its RMS range

So just talked to guy at nvx he said it's the dd1 not working with the new chips and that he could make a video showing where it clips and math to find the RMS. Old school style. He says some jl amps and other amps do this aswell.

But again main reason for the question is to see if dd1 really doesn't work then sonics dyno would not be accurate. It shows this amp way over rated. For 209$

My Sony hu did the second thing 5v 230$ hu

And nvx never answers there dam phone.

http://www.stevemeadedesigns.com/board/topic/202531-pioneer-head-unit-and-a-nvx-jad-12001/page-1

Shouldn't be the problem he used a different amp and it works on set hu

This very well could be I was just wondering if I'm fact it does have a problem with dd1 it's true the dyno wouldn't be accurate? Will see what nvx has heard about this is there even us a problem