Pelihagen

The one I bought had the same image displayed with the "RoyalSell" on it. I think I bought it from SkyHighCarAudio's page on amazon (?) Anyways, it did not have that print in real life, and I got the real product. 🙂 EDIT: This is the exact one I bought: https://www.amazon.com/gp/product/B00802PJ7O/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 From SkyHighCarAudio on Amazon.

Ok thank you

Hello, I just bought a 2-Channel amplifier to power my new SPL tweeters. I'm a bit confused on how I should use my DD-1 to set the gain properly though. From the manual: 5. Using included harness, connect DD-1 to output of amplifier. Connect the red harness lead to the Left Speaker (+) terminal, connect the black to Amplifier Ground. (Note: Most multi-channel amplifiers have the signal on Left (+) and Right (-). So I put the positive lead from the DD-1 to the Left Speaker positive, and the negative probe into the negative power connection on the amplifier? Can I just stick it in the 0 gauge negative, like if I were testing voltage with a multimeter? I just had to ask here to be 100% sure, don't wanna blow anything up. 😝

I have two amps as well, but I have them in a strapped configuration, which allows me to control them with just 1 knob.

I don't use bass boost on my amplifiers, but I have a remote bass-knob which I turn all the way up, then tune it. It says clearer how you can do it in the manual Edit: I also have everything else flat, on my headunit for example.

Yeah 😕 Hopefully someone with more knowledge can chime in and help you out. Good luck. 🙂

Ahh I see. I don't know anything about stock headunits really. But I have a DD-1 my self, and to your second question; In my experience at least (aftermarket Pioneer headunit) the volume levels are different between AUX and Bluetooth for example (by a lot actually). I don't know why that is though.

What headunit do you have?