Jump to content

zjKrawler

Members
  • Posts

    10
  • Joined

  • Last visited

Everything posted by zjKrawler

  1. Ok let start by I’m not sure if I’m posting in the correct area or not..but I have an Xs power 5100 series which was 3100 amps. I installed correctly charged before use all the required steps. Now here is my issue. Day 3 of having battery lost all power main battery dead, 2nd dead, couldn’t even jump while the 2 connected. Forced me to go through the whole system but eventually finding the suspect. While doing my big 3 the size of posting on alt vs the size of ring terminal used was an oversight. Needless to say everything was correct and installed proper. Now I purchased from Amazon through Jegs. My return window closed which never really opened due to being a battery. In my warranty it states “ original boxing must be used” so I can’t return or warranty this nearly 300 dollar battery cause of a 30 cent box? If any one has experience with these battery’s please let me know or anyone willing to make me a deal on a box? Seriously I have zero idea what to do . Please help
  2. Thank you for the advice. I’ll give it a try.
  3. Strapped I’m ar 7000 rms and 10000 max. I haven’t seen it drop below 12 v it usually runs at 12.4-12.8.. I know at 6 evls im slightly under powering them but I don’t think it’s by that much being 1250 rms each.. the mat only says by 500. At times I actually feel as though I’m sending to much power to them maybe that’s because I’m strapped at 2 ohms wired at .7 I’m not sure.. I’ve been out of this world for years and just getting back into it so a lot has changed since the early 2000s..
  4. I’m wanting to make a 4th order for 6 Skar evl d4 12s. At the moment powered by 2 Skar 3500.1d strapped and wired parallel for .7 ohm. Planning on 2 more so each strapped stack will run 3. I’ve been researching and using apps and software and it’s all kicking my ass. I have a comp in 1.5 weeks and at the current setup in a ported box at 12.6 cubes net with 98 sq in of port per side ( 2) ports.3 subs shared chamber twice for 6. I’m only getting 143.3db @ 37hz I’m pleased but I don’t think I’m anywhere near max output that I can hit. Dual alternators one for vehicle one for audio 160 amp each dual 800 amp xs power for vehicle and dual I think 1200 amp for audio all doubled 1/0 wire all the way back. Any suggestions or help anyone can offer?
  5. I have a SKAR RP 3500.1 D powering 2 4Ohm EVL 12s and I also have 2 SKAR RP 2000.1D powering 2 more EVL’s at first not much was audible in difference. After break in that changed greatly, the 2000.1D’s are more than plenty for those subs. Running single sub per amp I should of gone for the 2Ohm instead of 4Ohm but this kept me at safer levels. The 2000.1 does have enough in it to get those subs close to the limit but they are way less taxing on the power system. I dropped to 11.5 V on stock power with the 2 with the 3500.1 by itself I dropped almost to 8 but gave way better return being at 1 Ohm. If choosing out of the 2 I’d go with the 3500.1D, it’s strap-able, and as for size it comes in about same length just fatter and heavier plus greater adjustability. Although price per watt the 2000.1ds are cheaper for more.so if you have 4 Ohm the 3500.1 if you have 2 ohm do the 2000.1s one each.
×
×
  • Create New...