[CC-1 question when using passive crossovers]

I am ready to start tuning my amps but have a question about setting the crossover on the amp.  I will be using the CC-1 to set everything.  Running a Salt 200.2 to Focal mids/tweeters.  The front speakers came with passive crossovers.  Just curious if there is any need in setting the crossover on the amp since I am using passive crossovers...leave the amp X/O on full???  And let the passive X/O do all the work?  Or do I set the HPF according to the specs of the speakers?  This is my first build since 1990...so go easy on me.  LOL

[Battery / Capacitor Question ???]

@audiofanaticzthanks for this info...very helpful.  As far as negative runs...it is also triple runs of 1/0 front to rear.

 

Let me know what you think of this...

 

(1) D3100 under the hood

 

(2) D3100's & (2) SB1000-31 Superbanks all linked together in the rear with a buss bar???  Just curious if a buss bar is the way to go in the rear and make it all look clean?  Also, if I need to step up to a bigger Superbank like the SB1260-31...this is no problem.  Thanks again for this help!

[Battery / Capacitor Question ???]

Needing some help on which route to take.

Here is a quick rundown of the system.

- Mechman 400A

- (2) XS D3400's under hood

- Triple run of 1/0 OFC Knu Konceptz (front to back)

- Salt 8K

- Salt 500.4

- (4) Sundown X v.3 15's

- Focal Mids/Highs (front & rear)

 

As of now, I doubt this vehicle will be used for competitions...it will only be used for DEMOS at car shows, etc....

 

Here is my question:

1. Should I add a couple more D3400's in the rear ???

or

2. Should I add (1) more D3400 in the rear and (2) XS Superbanks ???

 

Last system I put together was in 1989...back then we didn't use capacitors...just need some help from everyone on what route I should take.  

 

Thanks!