LLP

I am ready to start tuning my amps but have a question about setting the crossover on the amp. I will be using the CC-1 to set everything. Running a Salt 200.2 to Focal mids/tweeters. The front speakers came with passive crossovers. Just curious if there is any need in setting the crossover on the amp since I am using passive crossovers...leave the amp X/O on full??? And let the passive X/O do all the work? Or do I set the HPF according to the specs of the speakers? This is my first build since 1990...so go easy on me. LOL

@audiofanaticzthanks for this info...very helpful. As far as negative runs...it is also triple runs of 1/0 front to rear. Let me know what you think of this... (1) D3100 under the hood (2) D3100's & (2) SB1000-31 Superbanks all linked together in the rear with a buss bar??? Just curious if a buss bar is the way to go in the rear and make it all look clean? Also, if I need to step up to a bigger Superbank like the SB1260-31...this is no problem. Thanks again for this help!

Needing some help on which route to take. Here is a quick rundown of the system. - Mechman 400A - (2) XS D3400's under hood - Triple run of 1/0 OFC Knu Konceptz (front to back) - Salt 8K - Salt 500.4 - (4) Sundown X v.3 15's - Focal Mids/Highs (front & rear) As of now, I doubt this vehicle will be used for competitions...it will only be used for DEMOS at car shows, etc.... Here is my question: 1. Should I add a couple more D3400's in the rear ??? or 2. Should I add (1) more D3400 in the rear and (2) XS Superbanks ??? Last system I put together was in 1989...back then we didn't use capacitors...just need some help from everyone on what route I should take. Thanks!