trulywickedcustoms

Nice!!! Thanks guys and what do you suggest ray I will be pushing the super tweets fairly hard so I figured 3.5k or 4khz is where they'd want to be?

Ok iv just recently sold my tpi440 and I think I'm gna purchase the combo pack of the cc-1 and the dd-1 but I have a few questions... Ok with the cc-1 I seen the accuracy video where he shows the gain matching amps so I can set all the cross overs exactly the same and then set 1 amps gain with the dd-1 and then use the cc-1 to ensure that the output voltages are the same on all 4 amps am I thinking about tht correctly??? And also for the cc-1 can I use it to set my super tweeter cross overs on the amps (mine go up to 12.5khz) I need or prefer 3500-4000hz?? Is there a track for this or will it work with any 3.5khz tone track? And lastly is there any voltage/output maximum on these such as a do not exceed this voltage? bc I'd be using them to set 4- DC 9Ks independently... Sorry if this info is posted else where i read over most of the topics and didn't see a clear deff answer to my exact questions Thanks for your time Blake

I don't think you need certain amount of points or atleast I hope so lol, and why $100 if you just run 1 thing like I plan on doing meca pnp that's it I still have to pay the others???

Yea son thanks for posting the pics Kyle! Back doors are next

I will have one of these.... Mark my words

Can't wait for this!!!!

hahaha i can tell him to have 4 more sets ready for you hows that!? lol

Yessir! i greatly appreciate it, good to see another fellow Team DC guy with 4 9Ks im itching to get mine all in!!! thanks agn!

AHHH thank you sir!! :drinks: all the same equal all the way across?

alright im getting toolmaker to make me some speaker output blocks for my 9ks, does anyone know if the speaker output terminals are a widely used common among all amps? like sundown cactus etc.. he didnt have a 9k to measure or test and wanted me to see if i could get info before i had him make them... im wanting to make 2 blocks utilizing both negatives and anther using both positives... hope so one can give me some info on this :drinks:

and thanks for the input guys

The point of the thread is to do away with external crossovers. I would wait on the Crescendo if you can't then run the Sundown 100.4 exactly im trying to do away with anything un needed or that i can bypass... i may look into the sa 100.4 or just wait on the crescendo 4ch.. i cant find info on the AQ?

ok im looking to do away with an external cross over for the amp on all 12 of my super tweeters... id rather run an amp with a cross over thats capable like the new crescendo 1100.4 or wte it will have that feature, and i found a precision power amp too but id rather not run it.. and the crescendo wont be out for a few months last i heard any ways any opinions are greatly appreciated

sick! i was looking into the same thing its a 15 passenger 155" wb express so nice and tons of room!! dont like the flames at all but damn thats a sexy van

i know i just posted one of these about RCA's as well but when i build my doors im re doing every single bit in the burban... RCAs, all new speaker wire, and power... bc the junk ass scoche lol (walmart) speaker wire on my highs has had quite a few short outs and is just junk wire IMO iv looked into monster cable speaker wire, and the KNU wire is nice... but i was wondering if anyone else had any sugestions? and no i dont want SQ Fn 100 per foot stuff lolz just a good quality cable is all... i may just go ahead with the KNU speaker wire? thanks guys

jl doesnt carry Y adapters in the blue series... prob go with the Monster Cable 300 series (red) cables

iv looked at the nice JL blue ones... but i cant find the Y's and other smaller items i need but the only place iv looked is on ebay thanks guys i like the KNU but most likely it will be the MONSTER's, JL's, or Rockfords

just wanting some opinions on good quality RCA cables... iv looked at MONSTER stinger tsunami.. any suggestions?? iv had so many go bad in burban im sick of messing with it so when i add amps and re wire all my highs im pulling all the speaker cable and rca's to run all knu speaker wire and im unsure on RCA's :drinks:

Looks like I have 4 of my 15" XLs for sale an I'm getting 2 more 9Ks to make 4 total and I'll be running 12- new M2 XL 15's

i was into it pretty heavy for a while and also was real big into bmx but i actually have my 2012 Giant Talon 29er 0 for sale with upgraded front forks, pedals, and a bike rack heck of a good deal if someone is wanting to start... ill even throw in a camelbak if they want it btw those are some nice rigs above!!

Shipped where?

I second that nick! Im down with about 20+ pro audios 8's!!!!

Sexyness /\/\

thanks sir! im thinking just go ahead and take it as far as i can behind the c pillar yes it will all stay in the same 4th order wall, and lol on 6 of each lol i need to hear both of them