sweet&low

started assembling the top half sealed it off and blocked out the back window. Then filled it with r13 Home insulation to make the enclosure to the Selenium 8s. Then suede wrapped everything. http://www.youtube.com/watch?v=-31AiiDnpNg

Then it went into the body shop for about 2 weeks. Window was leaking and all the spot welds on the front of the car were broken. So I had it braced and fixed. It has a piece of 1"x1"x1/8" angle iron running the length of the roof and then that was boxed in with 3 layers of 1/8" Plate steel. The window lip is about a 1/4" thick and all welds are solid or plug welded. They also rewelded the second brace back on.

Finally have some updates been a while but had a lot problems with the roof from the years of abuse. Also decided to wall it off again. Built a top piece to make the wall which holds. 8 Selenium 8w4p and 4 Power acoustic NX-5s.

http://www.youtube.com/watch?v=3IwH059qaAY

Run Wire and Installed 3 of the Shuriken Bt-60 Subs In It is Playing but is not sealed off yet. Have TL it though and so far it is doing 148 at 27hz and 146 at 52hz. http://www.youtube.com/watch?v=km3hzdLlUBk

Building the enclosure

http://www.youtube.com/watch?v=BoTuIWKwq4w&feature=relmfu Running New Raptor 1/0 and redoing big 3. Install Shuriken Bt-60 in front. Wood For Enclosure

http://www.youtube.com/watch?v=luzGpzAVhA8 Everything out and building the sub floor New Anzo Headlights and 6k HIDs (There on the car but haven't taken a pic yet)

Been working on this for a while but finally getting some build pictures up. Doing full rebuild on the Civic. Equipment OLD 4- DD 2512 Dual 4 1- DD M2a 1- DD C2b 1- DD C3b 2- DD 6.5 Component Sets 1- DD 5.25 Component Set 3- Kinetik HC-2400 NEW 4- DD 2512 Dual 4 1- DD M2a 1- DD C2b 1- DD C3b 10- Selenium 8w4p 6- Power Acoustik NX-5 5- Shuriken BT-60 Old Setup (153 at 54hz, 149 at 29hz)

Dont really want to. Open to offers for all of it though.

Here is what 1- 4in midbass and 1- Silk dome tweeter sound like on 40w this was about 3/4 volume. http://www.youtube.com/watch?v=bHJxYcciZ04

I bought this a while ago. I was going to build my own 5.1 surround sound or 2 towers but never got to it. Everything is brand new. Want to selling everything together looking for $400 plus shipping obo. 1- Pyle Pro P3001AT (used for about an 3 hours) 2- Dayton Audio RS52AN-8 2" Dome Midrange ( http://www.parts-express.com/pe/showdetl.cfm?Partnumber=285-020 ) 2- Dayton Audio ND105-4 4" Aluminum Cone Midbass Driver 4 Ohm ( http://www.parts-express.com/pe/showdetl.cfm?Partnumber=290-212 ) 4- Dayton Audio ND105-8 4" Aluminum Cone Midbass Driver 8 Ohm ( http://www.parts-express.com/pe/showdetl.cfm?Partnumber=290-214 ) 5 - Dayton Audio DC28FS-8 1-1/8" Silk Dome Shielded Tweeter ( http://www.parts-express.com/pe/showdetl.cfm?Partnumber=275-075 ) 2 - 6" Port Tubes ( http://www.parts-express.com/pe/showdetl.cfm?Partnumber=260-401 ) 6 - Parts Express L-Pad 50W Mono 1" Shaft 8 Ohm ( http://www.parts-express.com/pe/showdetl.cfm?Partnumber=260-255 )

Hey thanks for the heads up I checked it once but I will go though it all again. Video's of builds can be found here. I never finished the 6th order sold the woofers and did 4 12's but there is videos from testing it. http://www.youtube.com/user/sweetlow1234

You should be able to view them I have everything set to "everyone viewable". Here's some stuff I have done.

Dont know why that would be a problem there just going to scroll through and click on some one. No different then putting them all in a hat really.