pcchris
-
Posts
97 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by pcchris
-
-
I have 4 brutus 2608s and a maxxlink that ive been running 3yrs now....getting bored with the setup
and 4 Dual 2 subs
Heres my evil plan....
I have the amps strapped and the manual says to not run them below 2ohms while strapped...well i know for sure they can as ive ran them at 0.5 each but not strapped
I want to run all 4 subs wired into 1ohm total > into all 4 amps that are strapped 2x2....
to make things simple i tried to make a drawing with an online paint hope yall can see where im getting at
basically one voicecoil at 1ohm (scratch that 0.5ohm i metioned in the pic).... 4 amps 2 pairs strapped into 1 coil thats 1ohm_
just wondering would the 2 added amps feed back into the first two?
would the 1 ohm load split across all 4 amps?
....what problems could i be getting into doing this?...
also i have jumper wires going from the (-) on the master into the (-) on the slave of each linked pair___ should i jump a wire from the other linked pairs (-) into the first when attempting this or leave them be and run 2 strapped pairs into virtually 1 coil???
-
I had this problem before check your RCA's, y-spliters and grounds
-
Link is broken
sorry just noticed that... thanx for letting me know bro
heres the working link
-
i posted this in general discussion yesterday__didn't get any replies :o/ ...so i figured its better off here...
I'm a producer in Houston Tx Ive produced for many locals... one of my bigger productions Ive had a hand in was Boi I got so many by Young Problemz...(yeah it bassed)
anyways check these 4 tracks out and let me know your honest opinions... the artist on the songs is Justo of Young Problemz
extract them with winrar (Windows) or unrarX (Mac)
-
NEW song from Justo of YoungProblemz (will be on his new mixtape SuMn CruCiAl dA LeAk) produced by >>ME(Djsmartguy)...... @DjSmartguy (on twitter)
---Download here---
HIT 'EM___
www.twitter.com/justoyp
YoungProblemzGang | Facebook
-
-
is this box size okay for 4 18 hdc3s?
or should i rebuild? someone told me rebuilding to 24 cubes will make a difference and that my current box is too small since they require 6 cubes a piece....
also im running 4 bxi 2608ds
1 bt80 shuriken batt
1 300 amp ho alt
2 runs of 0 +/-
could my bass be sounding this way because i need more batt to feed my amps?
i know i need more batt but my voltage doesn't seem to drop to hard...(according to the dash) so ive been putting off getting the other 3...
my whole reason is because this setup is not creating the throat hurting pressure and air movement i intended ---so is this BOX, BATT or BOTH?
Kranny my ports down the middle would that make a difference?
-
moved to bottom of post
-
-
Ok i took the measurements of the box here goes
_The Box_
28" Deep
38" Tall
48" Wide
_The Port_
21" Deep ---(measured from where the port wall ends inside the box)
35" Tall ---(measured from inside the port)
9" Wide ---(measured from inside the port)
and Its double layer 3/4 birch on all sides
the port walls or double layered 3/4 too
Whats the cube and tuning? its supposed to be 25 cubes and 36hz tuning let me know guys...
-
but thier sealed
-
im getting them for $70 a piece i just found the specs online thats all
-
http://www.batteryte...2A5F4FA1495062C
can i use 5 of these for a system capable of 10,000 watts
-
ok bet thanks everyone thanks ericR for findn prices too makes alot of since i know everyones like a been sayn that i had to let it sink in....ill get the box built__i was putn myself further away from my main goal__gettn the hdc3s in
also where can i find the stinger spv70's that cheap 360 for 3 i looked them up and their around 3 bill apiece
-
your correct itll be more than 1000 and id just rather wait and do the hdc3 install the right way...
nvr mind im just gonna go head n get the 4 ssds til i can find time and loot to get the hdc3's in
were talkn bout ease over labor::time::money___im still gonna get my hdc3s in this will just be temporary its better than nothn
-
ok ok ok i have 4 hdc3s dual 2 coppers and 4 bxi 2608ds....ill need 4 batts (thats a $1000) and 2 300 amp alts (thats another $1000) multiple runs of 0 gauge and box building material plus ill have to pay someone to build the box im looking at about $3000 id have to spend to get my hdc3's in and running happily....
wut i want to do is spend this $1000 get the ssd 18's since they're already in a box and drop them in as i already have one of the amps hooked up and its 1 ohm stable n doesnt hurt my electrical i cant run those 4 18" hdc3s on 1 amp
wut i want to know if its a good buy at $1000 i can just drop them in and press play thats not the same case with the hdc3s...
im ready for bass_-_ sorry i dnt have time to make my post clearer im drivn right now
-
yep been had them i just dont have batteries and alts yet and i dont have multiple runs of 0 gauge and bracing rods and money for birch all that other stuff all i have is 4 18s and 4 bxi 2608ds had it sittn in closet for a yr now (i know i fail) ive been BS'n
this just seems like the easy way out until i can find time and afford the rest
im just lookn for something to hold me till then im tired of ridn around and people taking me and my presence for granted out bassing me when ive been loud before im ready for bass again
-
1000 is not gonna hurt me like that itll just push my build back towards the beginning of summer....
-
is 4 18" ssds worth gettn for $1000 in box tuned to 34hz i was planning on buying these until i save up enough to drop in my hdc3 18's....
should i go ahead and get these or just wait save up and build for my hdc3 18's thats been sitting in my closet for a yr :-/ i want bass right now....
what i want to know is will i get loud with 4 ssds on around 2600watts rms (the box goes to 1 ohm final load) let me know something before i spend the last of my income tax on this.....
-
that massive amp your using sucks i know ive had that exact one and though i was doing something those 18s want way more power than it can dream of putting out change that first
-
from da video____i seen youre shit___u let me feel it___NO HOMO___
imma houston oiler ___My groups on that that cd!!! BOI!!! track 4
-
lol POS these things blow with ease
-
hmmm im not sure but my dumb self put some pillow stuffin in my old enclosure with my 12's it took a lil bit more power and it seemed to make the box hotter inside (i used to stick my hands in front of the ports) i think its does something to the heating.....aaah i dunno im finna go back 2 sleep srry i couldnt be of help im hafl woek. ..zzz
-
u need a what?....NO HOMO
Help with doing the unthinkable on my brutus amps and wiring....
in SPL - SOUND PRESSURE LEVEL
Posted
i have them strapped right now 2 subs per linked pair ... used to be 1 sub per amp
4 hdc318s
1 300 amp iraggi alt (just found out about a sense wire and ran one to the battery (+) post last night with a 1a 200v diode inline
4 2608 brutus amps
one maxxlink
and one lil shuriken bt-100 thats been going strong for 3 yrs I just put bigger terminal screws on it and car went dead (battery probably never was getting charged as i had 6 0 gauges rigged on top each post)
ive had this set up for three years...wanting to try something different
I reconed 2 months ago used epoxy under and above the spider landing...I shortened my 38 hz port down to 34 hz (more excursion and im loving it) the epoxy i used during recone is holding up alot better than CA glue so far ...i think i can throw more power at em I know how to watch for clipping....