Jump to content

fearof85

Members
 View Profile  See their activity

  • Posts

    385

  • Joined

  • Last visited

 Content Type 

Posts posted by fearof85

  1. Tahoe System Rebuild 2009 is ALL BUT FINISHED and PLAYING!!!! UPGRADE to RF P2 8's 12/08/2009!

    in Just Meade....my projects - Tons of SMD Builds here!

    Posted · Edited by fearof85

    all my amps are over 3300 @ 14.4v - i am at 15.5v with my "pro" MLA. I have an amp on each coil so from what i hear, my impedence rise will be very low. I also factored in mids/high amps and its a little over 30,000 when all said and done.

    Yea the only thing I would factor in is impedance rise and voltage drop but allot of people don't do that anyways.

    Thanks for clearing that up, nice vid too . :D

    Drew

  6. Thinking of doing 4th-order

    in Subwoofers / Enclosures

    Posted · Edited by fearof85

    I would say that they would both play pretty similar but mine looks like it is louder all around. B)

    I am working tonight but I will get you a cut sheet tomorrow or Saturday, just let me know what you want it tuned to.

    Try and lower my tuning to 44 hertz and watch the low end get nasty, I didn't know you liked C&S. :spiteful:

    Drew

  7. Thinking of doing 4th-order

    in Subwoofers / Enclosures

    Posted

    Hm...

    So more around 4cubes ported, 1 cube per sealed chamber?

    Maybe do a 12*8 slot port?

    EDIT: I really like the idea of doing two separate sealed chambers bracketing the ported chamber if that will work well.

    The post above me looks like a decent design, I would do something like that with about 4 cubes ported though tuned to what ever suites your tastes.

    What kind off music do you listen to, chopped and screwed, rock, country techno?

    Drew

  8. Thinking of doing 4th-order

    in Subwoofers / Enclosures

    Posted

    I'm telling you bro you want more than 2 cubes ported that is just insane. You will not get any low end and will have port noise like a mother fucker. Why would he tell you to use 2-3'' ports or one 6'', the 6'' is about the same area as 2-4'' ports so why even recommend 2-3''. I wouldn't even use 3'' pvc on a regular ported box.

    I have your max dimensions so if you are set on this design then that's fine, just don't be upset when your ported box has more output.

    Drew

  9. Thinking of doing 4th-order

    in Subwoofers / Enclosures

    Posted

    Here's your bandpass if you can fit it.

    1.6-2 cubes max sealed

    4+ cubes ported tuned to 52hz with about 100sq.inches of port area.

    Make sure you port it through the rear deck and I don't know what kind of music you listen to but if you like those low low notes try tuning mid to high 40s.

    If you want to give me your max dimensions I could get a cut sheet for you.

    Drew

  13. one run of 1/0 for 8k rms?

    in Electrical-battery- Alternators- Wiring

    Posted

    Basically he has two runs of 1/0 to the batteries then from there he has it split to the rest of his system. One run of power, one run of ground.

    He said that the one run of power is sufficient because all it does is charge the battery bank, from there the batteries take over the 900 ampere current draw.

    I have always known to run multiple runs if running more than 4000 rms but if what he says is true then I'll have 30ft of 4/0 for sale shortly.

    Drew

×
×
  • Create New...