mrafrica

can you use host them in something so i can see them on the school comp???? photobucket doesnt show. and tiny pic doesnt either. image shack shows up

yes it is a new problem. yeah im sure they didnt help. i noticed it because when i would take off at stop lights i would spin the tires in the wet and stuff when i wouldnt before. so i have to take off alot slower then i would before. im having major traction issues.

yeah they are only available is single 4. so would 12 make a final load of 1 ohm or under i take it? man this is gonna cost me. at 80 apiece for 20 its just gonna be 800. then with two more possible.hmm. might have to rethink this. cause ill need to still get supplies to make the box and then more wire. ive got all the power wire. and might be getting an amp to push them for my birthday for 120 =] and then ill see if i can get someone to buy me atleast 6 for my birthday. this is gonna be tricky

ok i have a 99 durango with the 5.9 and its 4WD. it has a LSD. but lately only one tire is spinning when i hit a patch of ice. and its annoying casue i sit there and spin the tire when usualy id just not even know i hit the ice. like when im at a stop light and half on a snow bank or whatnot. but i can get both to smoke when i try in a straight line. but if i take off hard and hit a patch of ice only one tires spins. so would my clutch pack be going out in the rear end? and if anyone know would it be difficult to do yourself? and where and how much could i get them if i need to

or how would i find the load of 8 of those subs actualy? cause i might go that route. maybe even 10. i wish there was a bigger calculater(sp) out there

would i be able to get them down to 1 ohm?? because i would really like to get 200 on each one

im checking to see if i oculd wire up 6 sundown e8 subs to 2 ohm they are single 4 ohm subs. i want to wire this up to a single sae - 1200d

oh yeah. my bad. im not feeling too well so im not thinking the best right now. lol. would yopu know where i could get that specific relay at that you were talking about?

its a 98. ok so that is the bosch relay i take it. ok so if i hooked it up that way where would i wire in a switch to use for when i didnt want them on? but still have it where they would shut off when i turn the truck off

oh ok. yeah it is easier to buy things using a credit card/debit card and i dont have a means of processing them. so an ebay store would help out since you put it that way.

yeah i wasnt gonna jusr run off the fuse panel and rig some crap up. didnt wanna risk ruining things. how would i go about using a relay?? your help would be greatly apreciated. oh and how would i go about tapping into the accessory thing at the ignition?? thanks

it was on fuel i believe before. cause i used to watch something like this over a year ago. and i think it was called nitro cicrus

ok thanks. doesnt a relay act like a remote wire in a way? if i wired the lights dirrectly to the battery but stuck one in there on the power wire and had it hooked up to a fuse that was off with the vehicle wouldnt that work?

help me???

no no i wasnt thinking anyone was disrespecting me at all. i know what you guys are saying. i was just responding to what was said. i never knew thats what llc ment. ill check into that. but the stereo stuff would be for friends and stuff. cause i have alot of friends that like loud sound but dont know jack about it. wow meade checked in on this. makes me feel good for some reason. lol. everything you guys are saying is very helpfull and true as in how people are with business's. any more info would be greatly apreciated too.

ok so im gonna replace my fog lights but i would like to have them stay on when i have the highs on. but something im wondering is lets say i wire them in like you do with an amp. but with a switch hooked up in the power wire. how would i get the lights to turn off when i turn the key off? without using an existing circuit. like is there soemthing i could use in the wiring that would work on the principle of the remote wire function on an amp? how would i go about wiring in a fuse panel inside the truck and have it where the power would be shut off to it when i turned the key off? is that how the inside fuse panel works anyways? oh and btw i dont have any open fuse spots or else i would just use one of those to wire up the lights.

im very good at installing things. i can fix just about anything if you give me my space and alittle time. and i do things right the first time. if i dont know how to do something i will look it up. so im not gonna be doing stuff i have no clue how to do and risk screwing something up. id be pissed if that happened to me.

anymore input?

yeah i exspect it to be a rough road. hell if it were that easy everyone would be doing it. but i am well aware of the challenges of normal businesses and online businesses. ive been part of both before. and worked for both before. ive got someone who would do the website. and i know the price to get the site hosted. ive been sitting down and getting together what ill need to do and get to make this happen. its gonna take alot of work ik. but thats for looking out for me.

another business i am going to start is a stereo shop. but im gonna start out building speaker boxs and installing stereos out of my home. i need to get some more tools before i can do that. there are some people that do want me to build them stuff and are getting stuff in order for them to get a system. but the internet business im starting now is just something i can do while in school to bring in some money. i couldnt build anything till summer since i dont have anywhere inside to work and whatnot.

i use craigslist ALOT. thats a great idea i will try that. cause one thing id have to deal with is shipping. so id have to weigh the things and have shipping prices for each and combined and i would need to figure that kind of stuff out before i get a website up. so ill try craigslist. i dont like ebay cause of how you have to pay them.

thats what we are trying to figure out. i would like to sell like switchs and electrical stuff. and wire and whatnot. but she wants to comeup with a product that we could make ourselfs and stuff. like those rice filled heat pads and make them in custom sizes and whatnot. that would be an easy thing to do but theres some low prices on those things on ebay and idk if it would sell well.

ok so ive been wanting to start an internet business for awhile. and ive decided im gonna pursue it finaly. i found a hosting website and got the prices for that. and i know someone who can help me design the website. but the thing is me and the person im gonna be doing this with have a differnt opionion on what to sell. i was thinking of buying things wholesale and selling them but she wants to comeup with a product and sell that. we obvously need to start somewhere with selling something atleast. how would you guys go about this? ik this is gonna take time and money for it to take off. any CONSTRUCTIVE criticism/help wqould be apreciated. please no bashing this idea or anything like that.