mrteacha

not much but here is my daily

I've got a Rockford t10001bd rated at 1000 @ 1ohm more like 1400@1 ohm. Works perfectly.. upgraded to the T20001bd so the smaller one must go. Let me know if you are interested.

http://cgi.ebay.com/Rockford-Fosgate-T1000...=item27aca64cd3 I have this up on ebay it does 500 @ 4 ohms 1000 @ 1 ohm

Did I post a new thread offering my amp for sale?NO OP needed an amp and I offered what I have available...I dont live on these boards so my post count is low but I do have 100% feedback on ebay and ca.com as well

I have a Rockford t10001bd rated at 1000@1 ohm, more like 1400 @ 1 ohm. Works perfectonly reason I am getting rid of it is because I got me a t20001bd $230 to your door

I have been using knuconceptz wires for years without any complaints. My entire system is wired with there wire.If you are needing wire to complete the big 3 hit up scottiej he sells kits for the big 3 and he has them crimped with ring terminals on them already . I ended up getting 5 pieces (about 15ft total)of 1/0 gauge from him for my big 3 ..he charged me $36 to my door..shipped quick too paid him on tuesday and my wires were at my door by thursday

I got a brand new set of rockford 2009 model p1652-5 components still sealed the way the came from rockford

I have a brand new set(still sealed from Rockford) model #p1652-5... these are the new 2009 model components let me know if you are interested

not sure if this is what you are looking for but it is brand new never used-still sealed in rockford packaging

So I finally made time today to lok at everything . I double checked the wiring and there was nothing frayed or pinched.so i decided to take the Rockford t1000 . I replaced it with a rockford 500.2 using all the same wiring that i was using for the t1000 and as soon as I gave the 500.2 power i got BASS. it powered up and worked just fine. ....So the t1000 definately has internal damage to it.. Anyone knw of repair services for this thing?

I guess first thing in the morning I will double check the wire from front to back to make sure is okay....

the gain was set to the lowest point on the amp and onthe bass knob the HZ was also set low to about 40... I was planning on tuning it by ear but as soon as it saw power the fuse at the amp burned. I bought it used from someone on another forum. Does anything looked messed up in the pictures from original post?

The amp came with a 150 in it and the specs call for it as well. The wire is 1/0 gauge and the fuse on the power line is 250

the amp fuse is a 150 which blew twice the one under the hood is a 250 that one didnt blow but it did get red

Can anyone see anything on the board that may be causing this? I can't see anything burned or smell anything burned onit :