Jump to content

fir3lord

Members
  • Posts

    8
  • Joined

  • Last visited

About fir3lord

fir3lord's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. That's almost 11 cubic feet internal volume. I figured about 2.5 - 3.0 per sub ported. Yes, the box will slide right in. This isn't my first build, I have been into car audio for about 22 years and have designed and built many systems, just never one with subs facing upward in a trunk.
  2. These are the subs that I have now. Which would be best to go with, 3 of these: http://www.sonicelectronix.com/item_18916_Infinity+Reference+1260W.html or two of these: http://www.sonicelectronix.com/item_9238_Pioneer+Premier+TS-W3001D4.html
  3. This is my maximum dimensions I have to work with 34" W X 32" D X 18" H
  4. That's what I was thinking too. I could do just three and seal off right behind the rear seat firing into the cab. Only thing is, not sure if I can get all 3 on the front face with only 34" of width. Maybe putting the two outer subs at the bottom and the center one at the top of the face with the ports below and above each sub.
  5. Is there a big difference if the subs or firing up instead of the rear of the trunk? Ports will be facing rear no matter what. I have about 11 cubes to play with and will be putting 4 Infinity 12's. My whole trunk and rear deck is already matted so damping should be good.
×
×
  • Create New...