skittlesRgood
-
Posts
8255 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by skittlesRgood
-
-
you cant copy paste pictures, you just have to use the image button correctly.
-
yeah, LOCs are crap. always avoid using them if you can. there are other, better, although more expensive, options.
-
Thanks all.
Ive never seen it charge over 13.6 ish.
My fluke is basically permenant in the back bank. I run the MIX/MAX option while banging, demoing, and comps.
Anyway. Thanks all.
oooh... definitely something wrong with it then.
-
hmm.... math.... you win, sir.
-
sax 125.4 or the 10" zv4
-
I would stop resetting it. it should figure out that the battery is fully charged pretty quickly and go into float charge but you're basically just over charging the batteries every time you do that.
-
lol it wont go back to amber. if its amber that means its in serious charge mode. green means its in float charge, also called maintenance mode. it wont ever need to go back to amber because the battery is still fully charged.
-
Well I'm deploying again so I'm not sure how long it'll be, just want to know i won't come back to bad batteries!
The bitch is.. you want some one, to "restart" it.... it seems after it hits GREEN,...... you need to shut it off, and restart it to go amber.... does that make sense?
EDIT- maybe Nathan will chime it.
But, i know after mine hits float, it goes green.. and wont keep charging. Seems there is a "time period" it has built in.. dunno
No, the charger is still charging. most chargers do 2amps at ~13v in float charge. you wont have to restart the charger and it'll keep the batteries fresh while you are gone.
-
the intelli charger goes into float mode once the cells are charged. you could leave the charger on forever. people float charge batteries all winter in boats, tractors, etc.
-
to answer your question, no you dont have to use 36, but you do have to pick a max volume, tune to that, and NEVER go over it. just make sure it's under 36.
Now to help a little more, tell us what subs, amp, and the details of the box.
-
its usually better to point the subs backward unless you seal off the trunk and point them forward.
-
spaced spiders... this might move a little.
-
wattage sounds right for the impedance.
the only reason I know of for this method to be inaccurate is because the meters read at a certain frequency. so playing a 40hz tone while the meter works at (for example) 50hz, you don't get accurate readings. but close enough is close enough. after all, this is all for fun.
-
periodic charging is nice, but not necessary. It'll just help extend the life of the battery. most people don't own the XS charger.
-
crank up the voltage until it puts out the claimed power or blows up. have some fun with it
-
1
-
-
I like how he never replied after the post showing one coil being out of stock while the other was in stock. I think you found his problem and he's embarrassed lol.
-
correct. they are connected internally.
-
look at the bright side. it was crooked anyways lol.
-
if its the dynamat xtreme then yes, its fine. if its the "original" stuff then I wouldn't use it at all lol.
-
sure, sign me up. i'd take hitman.
-
I hate those schumacher chargers. I wont ever charge my XS batteries with them. they charge up past 15.5v and I've heard my last batteries boiling. I have two different chargers from them and they both do it. I only use a little battery tender or my XS charger.
Check out DCpower and mechman for an alt.
since money is no object, throw an extra battery in the back too. it'll definitely help.
-
there should be a test that our SS rep did in this section where he shows the difference between peal and seal and SS. I believe he does both thicknesses. so that will have a graph, actual data, to show you the difference.
but the short answer is that a thicker deadener put on a panel will have a lower resonant frequency and take more energy to move.
-
I agree.
it's manageable but there are oddities that make it pretty annoying. deleting a lot when you hit back space one too many times, as mentioned, is one example.
-
troll.
upset that the ported recommendation isnt correct, but wants to run sealed.
leaves the biggest baby comment I have ever seen in a forum. and I mean that.
Battery question
in XS Power Batteries / Chargers! (and other stuff too)
Posted
only "problem" that could happen is if one has a lower resting voltage. the lower voltage pulls from the other battery until they even out. but that really isn't an issue.