hertz hurts

Travis Barker is one of the sickest drummers on the planet. Look up any of his stuff on you tube. I personaly like the Soulja boy- crank that, and Busta rhymes- Don't touch me remixes.

Yeah I'm no engineer and don't need a 200mhz, 100ms sampleing, 6 channel scope. I'm an auto tech so I'm just going to be using it for scopeing primary and secondary ignition systems, sensors, alts, and some car audio setups. The best part is work is paying for it, up to $300.

I have been wanting to get me a handlheld scope. I have been looking around on the net and was wanting some input from those of you that have used them. What do you think of these: http://www.allspectrum.com/store/product_i...?products_id=30 http://www.allspectrum.com/store/product_i...roducts_id=2814 http://www.newark.com/jsp/search/productde...AFC-GB100000001 The first and second one have 12 mhz bandwidth, which is more than the 440 that Meade uses. I also found the one that Meade uses here, a little cheaper than in the link he has posted: http://www.mcmelectronics.com/product/72-7...ELAID=220584686 Let me know what you guy's think.

Didn't want to start another thread so I dug this up. Got my batcap in today. Great guy to buy from. Thanks

It's not the air intake temp sensor. It is the mass air flow sensor. The air intake temp sensor is the one thats on the back side of the corogated tube that the "new" air filter is clamped to. Mass air flow sensors have 4 wires going to them. Air intake temp sensors have 2.

Try sketchup. It's free. It's tricky to figure out at first. Just keep playing with it till you figure everything out. I like it .

WinISD locks up on my computer everytime I try to use it. Took it off. I use exposports box calc and sketchup now.

I'm gathering supplies now. Waiting on a few things to come in. I don't like to start projects until I get all the things I need. When I do start I'll take lots of pics.

Yeah I'm doing a blowthrough in the rear window. Got the camper shell on and my accordion boot is on the way.

It's going in an 86 f150 regular cab pickup. Right now I've got a PA apc2200 for them, (I know Power Accoustic boooo) but I'm thinking I'm going to get me a couple sundown saz1000d's .

Yeah your right. If I'm going to do it, might as well do itall the way. I'll never be happy with it if I don't.

Yeah I've really been thinking of glassing it all. Keeping it curved and really maintaining the 10 inch port around the corners. Just not sure if it's really necessary or if just using the wood braces would suffice.

You meen like this?

Well if I can get good enough feed back on it, I'm going to build it and start a build log. The back of the box is where I'm going to build the amp rack, over top of the bottom part where the "L" sticks out. Thinking about floating the amps there. Not sure yet. I'm decent at metal fabrication so I might make same floating racks with metal. Either that or it will just be a wall with a cover panel all carpeted in.

Anyone else?

Well what I'm wanting to do is put these in the bed of my truck with a topper on it. Remove both windows, us ethe accordion boot, and set these right in the back window. Those 12's have 100 square inches of cone surface, thats why I'm doing 10x10. Is there a better suggestion mabey? Thanks for your input.

Forevrbumpn I'd really like to get your opinion. Your tutorial is what got me to design a tline in the first place. Anyone else wanna give up thier opinion too I'll listen. Thanks.

Ok here they are. Let me know what you think. Will it work?

Got it figured out now. Thanks guy's. I'm at work now and the sketch is on my laptop at home. I'll post it up tonight. If the box works it will be a tline mini blow through, I guess. Not really sure what eles to call it. 2 Kicker solo l7 12's, 100 square inches at 8.3 ft long, 34hz. Hopefully it will work the way I have it designed.

I've got this t line box design in sketchup, but I don't know how to get it on here. If someone would tell me I'd apreciate it. I want to know if you guy's think the box would work.