BobbyG2
-
Posts
1560 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by BobbyG2
-
-
I'm sure a few people are looking at that and thinking...
-
2
-
-
My roommate was going to do something like this. I told him to get a ring terminal and I used my 6ton hydrolic crimper to make sure he didn't though.
Made sure he fused it.Couldn't stop him from using a jumper cable for the ground, though... Oh well, it's just my old crappy boss amp... Lol
-
Yeah, me too, but I was just offing up a suggestion.
-
I was once considering doing something like this, and here's what I'd do:
- Two separate amps, or a two/4channel.
- Build two separate enclosures, or 1 enclosure with two totally separate (sealed from each other) chambers
- One for the SA 12(s), with the recommended airspace, tuned to ~20 Hz
- One for the SA 8(s), with the recommended airspace, tuned to ~40-50Hz
- Make sure that the low pass on the Amp for the SA 12(s) are at or slightly below the tuning frequency for the SA 8 enclosure
- Make sure the High pass (Or subsonic) on the amp for the SA 8(s) are at the same frequency it's at for the SA 12(s) low pass
- Adjust the Low pass for the SA 8(s) to meet the High pass (or subsonic) for your Mids amp, and adjust them both higher/lower (but still matching) until you feel that it sound right with your components.
You might have to make some adjustments to your gain to get the SA 8(s) and SA 12(s) to sound even, but you should have a relatively flat response from <20Hz to whatever you set the SA 8(s) low pass to.
-
-
I got a laugh out of the reporters reactions to the video...
Lol x2
-
Not playing the same frequencies...
-
These components are for more of a sound quality on a budget type set, the Neo Pros are meant to be super efficient and higher power handling. They're totally different.
-
They don't need to be in separate chambers. Imo it's less complicated and saves airspace if you just do one chamber, and achieves the same thing if the airspace is the same.
-
Hey, there's 5 sa8v1.5s for sale in the sundown yard sale thread - $65 each. Just letting you know in case you wanted to hop on them before everyone else!
1 d2, 4d4's:
-
-
Looking good! I have a friend whos getting a new car where space will be a problem, I'll let him know that these are available.
-
Welcome to the forums!
-
Sweet!
Ordering my two sets on the 25th! -
So the surround, spider, frame, and motor are all able to go 60mm? Or just the surround, and you just want to make sure you have some headroom?
-
Yeah, for daily. Tlines essentially free air the sub so you want to stick below or at the highest the rms of the sub so you don't bottom it out.
I would stick with a good amp with an rms of half the subs rms to be safe, but if you want to go higher take note of what volume it seems the sub is starting to stress and don't go above that volume or turn the gain down.
-
Good job man!
This would be a great thread for people to follow to learn how to recone. I don't think that putting 1000 watts on it in a tline would be a good idea through
-
Sundownonly.com, soundsolutionsaudio.com, woofersetc.com
-
-
No free airing vid yet?
-
The new Sundown SAX 1500Dv.3 should fit the bill
-
I'll probably never considerably overpower a sub, even if I know it could take it. Unless maybe if I ever get the worlds highest power handling sub and there's no more options to get louder than to overpower them. Until then, I'll use a high quality amp with high quality subs with matching RMS ratings.
-
Might be able to get away with two 250 amp alts but after vehicle draw, and the draw from the amps he's gonna need for his soundstage, two 300 amp alts should barely leave any headroom. Unless he wants a bigger battery bank, but then when he plays it all day his batteries will eventually drain.
-
Damn, what an awesome first system lol
4cu.ft. sounds too small? You seen the magnets yet? Lol
12cu.ft. tuned to 35hz. for daily music With your gains set properly.
You'll need a big battery bank (3 XS 3100's at least) and if you're planning a daily build two 300amp alts.
.gif){kind=small}
Made sure he fused it.
Heelllllooooo d7500
in XS Power Batteries / Chargers! (and other stuff too)
Posted
D7500 ~ D3100
MSRP $849.99 ~ $549.99
Weight Lbs. – 99.8 ~ 75.4
Weight Kgs. – 45.26 ~ 34.2
Length – 12.9 in ~ 12.99 in
Height – 7.2 in ~ 8.43 in
Width – 10.75 in ~ 6.81 in
MAX Amps – 6000 ~ 5000
Ah – 140 ~ 110
RC – 280 ~ 237min.
CA – 1700 ~ 1360A