CallMeTy

yea imma have to look for a smaller female connector. or just use pliers like you said. ill work it out it aint no biggie

well the female connector does fit the terminal on the left (the bigger one) but the terminal on the right doesnt fit the female connectors and there's no way for it to fit the male connector. so maybe there's a smaller female connector out there? or ill just solder bare wire to it.

thnx mane

what section is their speaker wire in?

heres a pic type r 6.5

my components and coax's have male and female terminals. but it seems that i can only find these quick disconnects in 100 packs. clearly i dont need that many. so what do you guys do. just solder the bare wire to the terminals?

so when is DAT suppose to have this sale on the 4125. SUPER INTERESTED

yea that dat is a bit on the higher side of my price limit

So im going to go with 2 Fi BL 15's. Out of these amps which will give me most bang for buck: Rockford fosgate 20001bd Sundown 2000d audioque 1200d(2) audioque 2200d (write in your choice)

you can check here: www.stockinteriors.com i know meade ordered some from here for that civic that was stolen, so i checked them out. i got some samples on the way. to get ssamples is free to. hope it works out

i dont know if this thread is still going or what but i have a few words 1. i would have went to jail once i chased those dudes down, young or not 2. thank you for posting where you got your carpet from, ive been looking for some for a while now for my 99 altima. got some samples on theway. when you ordered your, did you get the regular type or the plush? 3. that all black interior "Goes Hard" but i dont think i could pull that off here is SC it stay so damn hot 4. bed liner on the box....much respect 5. AWESOME JOB and better luck with this one. Much respect man

anybody know?

will the two fi bl 15's hit the lows pretty hard or no? anybody...

do i need to worry about the rockford amp overheating at 1 ohm?

this means the subs would be facing up towards the trunk lid and the ports would be in the back of the box facing the seats correct?

im not sure if you will be able to see it but wheel well to wheel well (towards the back) is 40 inches side to side towards the front is 53 inches front to back is 40 inches height is 17 1/2 before i hit the speakers height up front did not measure but maybe 20 or so and the trunk opening is 17 inches i hope this makes sense

i think i might be having a total brain fart but what is that in inches?

itll be going in a 99 nissan altima

this is for two FI BL 15s ok. im trying to get a rough estimate. fi's website says is should be between 2.8 - 4 cu^ft. and tuned between 28-37hz. lets just make it a simple 3cu^ft and tuned to 30hz(if this part matter, i dont know) what size box (roughly) am i looking at for two 15's? hope this makes sense

ok. im trying to get a rough estimate. fi's website says is should be between 2.8 - 4 cu^ft. and tuned between 28-37hz. lets just make it a simple 3cu^ft and tuned to 30hz(if this part matter, i dont know) what size box (roughly) am i looking at for two 15's? hope this makes sense

anybody know of a good box design program?

yea i think im going to go with the rockford.

do you guys think the 6.5 type x components are over rated? better choices out there for less? or ou think its just personal preference? i just know theyre made for sql and thats what i want up front. im trying to have it sound like a concert inside my car. any suggestions as well?

and i take it the only place to get fi subs is from off their site

oh ok i got you now