vonhanson

you already have that sub? never heard of them and you can get a lot better for cheaper.

pm'd ya james.

Bump up, anyone able to put out a design? i'd like to pay for a good one, but i'd like to see someone try first.

Bump, anyone here working on this at all? heres a picture of my truck, i took off the topper for a bit. Tires are 33x 12.5 x 15 with stock suspension.

Max i'm looking at right now would be, 14.5 high 14.5 wide 25 long, port up sub up? only thing i really want smaller would be the length. the box sits into the side of the cab like 5-6 inches or so, so the sub has to be kinda in the middle so it clears the interior panel. heres RE, like i said i dont know port/tuning stuffs but thats my max dims at 1.9 cuft

i just don't want it to take up more than 1/2 of the back area, i need room for camping gear and what not, and for the AQ's 10 it says 1.2-1.5 ft^3 and just using RE calc, i can get 1.3 cuft without having it to massive, i just don't know how to do the tuning and port stuff, i'll look at it more tomorrow(or friday) depending how busy i am and see what the max dims i would like to use.

mmk, if i have time tomorrow i'll figure out the max dims i can fit/want.

dims for if i trim the interior peices? all of them for the old box are in the link, and i was thinking a 10, i have 2 10'' comp vr's right now, and if i go with a single AQ its gonna be way better in a good box. they are loud now, but i definitely need to upgrade.

Hey guys, i think i'm going to finally get around to upgrading my system and making a new box. i have a design in mind, but its for sealed and not much airspace. so i need it larger and with a port if possible. the sub/amp i'm going to use is still up in the air. i'm not sure if that matters to much atm, i'm not in a huge hurry. i've been thinking about going with a AQ HDC3 10 or 12 sub. here is the basic design http://www.ranger-forums.com/f59/how-build-sub-enclosure-jumpseat-cavity-53366/ Now here is what i'd like to change. The Red, i'd like to trim it a little more, then box can be taller/wider. yellow isn't needed really, it just covers up a part if the interior. blue part is an idea for the port? or the sub can be on the topside with port up or whatever you think would be best. box will be built by my dad(he does woodworking) and me, and will probably get bedlined to not have to carpet, keep it kinda low key. i'd also like the sub to sit down in the box, not rest on the top of it. i can go measure inside the truck if that helps out more, just let me know if anyone is interested in this, and how much it would cost for a design.

My truck's lights started to flicker only when its running. AFTER i redid my grounds on my big 3. still not sure why its doing it. ( it didn't do it before hand)

what would you recommend for that then? just the copper? and figured i'd upgrade front bat and add a battery in the back of my cab.

mmk, i was planning on getting 2 10's with there 2200D amp for both, so it wouldn't be seeing that much power. but wanted to check.

i thought it was the other way around.

What kind of power handling difference do the alum/copper coils have? Thanks.

for my girlfriend. anyone have working used parts. need something just to run XP, Homework and web surfing, light gaming no hd videos gotta be cheap. i can put together just need different stuff to get.