solosickness

DANG! CRAP! DOH!

kk i will

bot right now

hi, just lookin too buy a kicker warhorse not looking too spend 2 grand. Im hoping too get one somwere around 1100-1500, 1500 uooer end at 1500 if new with warrenty 1100-1350 n up "used". I am looking for a good condition used warhorse or"preferred new". if you have another amps for offer to me, you will have to make it well worth it. anyways i had a few opertunities to get it for 1000-1350 new with warrenty. but funds where just short at the time.Even if u know someone who knows someone who will sell me the amp please thanks guys.

ur lucky thats all she did, my crazy fuckin ex stole my rf 40001bd and both my batteries, and ran outta state too north caralina. Bitchs hate things that we "love" she always had a snotty atittude too all my gear. heres a tip, u ever move in with or let one move with you, dont trust any of ur shit around them, specially if ur fightin alot.

x2 its just bound to happen again. Thats dumb the wire should be longer. :-)

SO WAIT A MINUTE... SO THE QUESTION IM REALLY TRYING TO ASK IS... HOW THE FUCK DOES THE JBLGTI6000 DO more power with higher ohms? or it it just a very magical amp that other compainies should look into cuz that is BEAST. lol im not a fan of buying more alternators... just increase voltage, i find it stupid too run 6-7 runs of 0gauge wire when i can just run two lines, and do the same thing. I think other companies should realllly look into this. the jblgti6000 is a step into future amplifers in my opinion.

Ding ding ding. 1K rms at 4 ohms is gonna have less current draw and require a less robust electrical system than 1K rms at 1 ohm. This is purely due to how the amplifier works. 4ohms is much more efficient than 1 ohm. Many amps you'll see numbers like 500 rms @ 4 ohms 800 rms @ 2 ohms 1000 rms @ 1 ohm Lower impedances require more power due to lesser efficiency. That stated, it's still usually cheaper to get an amp to do 1K @ 1 or 2 ohms than to get one that does 1K at 4 ohms. The difference in electrical system requirements isn't big enough to make a cost difference. That really only comes into play if you're running below 1 ohm for competitions or feel the need to run .5 ohms daily. FINALLY I GET IT!!! so that all means amps like the jblgti6000 that does alittle over 8k rms at 4ohms, simply does the same thing watts wise, just draws alot less power thru my wire too supply the amp. so the difference is... hifonics sampson at 1ohm does 8k but draws current a different way. the jbl is going too be better cuz its gunna draw less amps, to do the same power cuz the voltage makes up the difference? thus the difference isnt seen on the meter, but on the alternator? lol YAY correct?

so teqnically im drawing less current throught my power wire due to the higher voltage? wouldnt i get more decibles due too the larger load making the cone move more with less amps?

so teqnically im drawing less current throught my power wire due to the higher voltage?

most people ask... whats better 4ohms on MY amp or 1 ohms on MY amp. IM ASKING... whats better 1sub at 1ohm to an amp stable at 1ohm for 1krms or 1sub at 4ohms on a more powerful amp that will do 1krms at 4ohms, witch is harder too do...but dont i get anything out of it?!?!

OKK alot of people have asked this question... Whats better a small load or large load.? lol well thats kinda what im asking but... ok so if i take a load of 1ohm off a 10" sub, hook it up too an amp that's stable at 1ohm and puts out 1k watts at that impedance. now heres the twist. Im not asking what would be better on "THAT" AMP. Cuz i "KNOW" ill just get less power out the amp at 4 ohm DUE TOO THE LOAD. Now... If i go an grab another amp that does 1krms at 4ohmms. Now on overview of this is x1 sub "1ohm" on 1k rms x1 sub "4ohm" on 1k rms The 4ohm load will require alot more volts. and cost more money, cuz its harder too do 1k at 4ohms. has anyone ATUCALLY TESTED this and prooven it?!?! isnt my sub gunna be seeing more power overall?!?!? its deffinitly seeing more voltage. how can this not affect ANYHTING.just dont make sense too me. WHY?!?!?!

WHERE CAN I GET ONE PLEASE... HOW MUCH DO THEY RUN? PLEASE CAN I HAVE A SPECIFICATIONS LINK....PLEASE...TY

how much u pay for the dc lvl six i might get two...

dam no one really? thats not like the smd forums 0.0

pls help me some1 i know somone here could tell me... PUHWEEEEEEZZZEEEE!

wanna play wow but when i start it too play it says... failed to find a suitable display device exiting. is this a driver i need? where can i dnload it?

Most subs dont even like 15hz... so what do u think could take it? 1k ea with decent sq cuz u need it with low tuned systems imo i was thinkin maybe sumthin of re's

Well yea ive seen alot of gary i like him alott. but he plays alot of 25hz tones and maybe 20 but isnt his shit tuned at like 25hz? Im talkin 10hz lower, with 25hz being my highest freq lol if it possible could the amps take it? GIVE ME SUM idea for a sub please.

Ok well. Im sittin here on my day off smokin on some reggie... I think too myself... What if I or someone made a 24+ subwoofer build not just tuned low but... Well ok...The human ear goes down to 15hz or so right?.. What if someone tuned an enclosure to 15hz and really gave it some power? Does anyone really know what would happen? What sub would be good to use for this, I was pondering on maybe some good excursion/highoutput subs. at about 1k ea or more if I do it with the amp Im thinking about. The hifonics sampson, I am highly attracted to the amp, cosmetically and output. I was thinking maybe 3 8ks on 24 subs that can do it clean and loud since its such low freq. Im assuming Ill need a 10" woofer thats rated at around 1.5k to play 1k of 15hz maybe more I dunno what do you guys think? What kinda of db u think this power mixed with a well designed/built enclosure woudl come out with? think maybe 155+ db 15hz? no?

whatup my mich peeps!, i support the mett! by the time its warm ill be able to come, now with even more power from my new iraggi 270amp alt. was from inkster when this was posted, detroit before that, but now im in westland warping building windows from the streetlight!

ok last question? does ne one know a nice deal online for the stuff whats it called? what would i google?

well my design is 10/10 but my build went pretty good too i think imma use 3-4 coats for shits n giggles. Wheres can i buy some online? and also do i apply it on the interior of the box only or both?

ok well ill prolly do 3-4 coats but do i apply it on the interior only or exterior too? i wanna know everything bout this stuff i shuld know. my system is gunna be daily, and my box is a ported horn hybrid designed by a dude on here who designed another box for x1 15" that did a nice hairtrick on 1k

wheres a good place for me too buy some that works well and how many coats should i apply?