bonang

Like I said i have fix alot of the issues I had. Alot of pics I dont have yet. I cut that line out and filled it in copmletely. In the fall I am adding a 8" shallow sub for midbass so the line is gone and I fixed along the front side of the door where the two plastic peices meet and cleaned that up. I just have to clean around the speakers soon and final check and go over then off for a new wrap. Thanks,for the commments, more to come btw but its fucking cold out still.

Hi All its been a while. I lost interest in the project due to cold weather being in Eastern Canda and all...... But I did a little and now I relaize I need a circle jig for sure. I ran into issues with the holes not being perfect so I have to resolve that and of course the body work still needs to be completed 100% so I can get them wrapped. So this is what I have so far mind you this is primer, not close to being done. I fix alot of the issues so far but no new updated pictures. Its getting warmer here so expoect some major updates soon!

Thanks! I know the circles are kinda rough. Kinda being a loose term! lol But in the end before I wraped it I sanded them with the DA and smoothed them.

Hi All, I had a system in this car since 08 and updagraded and changed little things here and there. Then after of course watching Meade's videos along with alot of other youtubers that I am suscribed to I decided to do a little over haul over time. My factory speaker pods....well I cut them up bad so I ended up making a new set and changed the angle on them to suit my height and not some 4ft GM engineer lol: After some mat and resin: Installed with alot of older Hushmatt During the summer I decided to do some A Pillar pods. Went with a 4" Dayton audio speaker. I read some reveiws and thought I will give it a shot. So I built the pods: Now since winter hit I bought some door panels and am about to start them. I will keep this updated as much as posible. Thanks for looking!

Fixed. Erase me!

cdn. Realy like it and its better then the junk we have around here. So realy I dont live in a area that is able to get nice gear so I bought this.

Thanks fellas I did end up buying since I live in Canada and shipping would have been killer. End up paing 150.

After talking with him this afternoon I got it down to 200 lol so it aint bad but going test it with the meter tomorrow to make sure the coils are alright.

Heres a pic so it wont lead you from the site.

Hi all, I was looking at a local ad here and buddy does not know what model sub it is.... q bl btl I know for sure its not a btl. http://capebreton.kijiji.ca/c-cars-vehicles-auto-parts-tires-audio-GPS-Custom-Built-FI-12-Subwoofer-400-OBO-W0QQAdIdZ208750321

I did a cooler once lol Should be interesting.

Well its done. Not pictured is the bondo process. Only the face is done since the rest is going to see carpet.

Hi All, I might have posted before, but cant find it to add to it so I will start over i geuss. 2007 Monte Carlo LS 3.5L Factory 125amp Alt 36sq ft of Hush matt on the trunk lid and doors Kenwood Excelon KDC-X993 Kenwood KFC-P709PS 12 awg peaker wire front to back / 16 awg to rear DEI RCAs front to back Kenwood Excelon KAC- X541 Kenwood Excelon X1200M 1/0 Knu Konceptz wire and distro blocks Optima Yellow top battery Big Three in 1/0 wire(added a fourth) Custom Built Amp rack Custom Built Sub Box Pics below. Let me know what you think Kenwood Excelon KDC-X993 Kenwood KFC-P709PS Yellow Top with some of the wiring under the hood: Ever since this pic I put on black ties: Kenwood X1200M: Kenwood Excelon KAC- X541 and the newest addition to the car, the amp Rack Sub Box Build: 3/4 MDF Double Faced Brace in the corners with 45 deg Glued, nailed and screwed Resin and fiberglass the inside and outside Bodyfill and paint Pics below: Going to have the face doubled faced and the sub flush mounted.

I plan on making something from it. Its blue right now but who knows what it will be painted. I have a crap load of pics and dings on the bumper and hood since this is a year round car and I do alot of hwy driving so I might get the body shop to paint the box while there at it.

I heard that a couple times....... But the people who told me that could not explain to me why. So why should I lose the breaker?

So after a summer running the two 12's and localy I was one of the higher DBs in my class (yeah not compairable to alot of the folks on SMD ) I decided to build a new box for a single 12, drop a class and drop the load on the RF 800a2. New Box build. This time I took lots of care into how it went together. Box is 2 cub before displacment(maybe a little less) tuned to 35hz: Then after some badness with wiring and cheap fuse blocks I decided to upgrade (Thanks to the this forum I found knuKonceptz) And last but not least My Dirty ass: So with the dual box I was hitting 141.7 on 800rms So far with the single box I hit 143.4 on well the 800a2 is not rated for 2ohm load....so I am not sure.

Hi, My name is Andrew. I made a couple posts here. I live in Nova Scotia Canada and finaly decided to post up some pics and videos. Car:2007 Chev Monte Carlo LS Gear: Exile Comp65.s Pioneer 6x9s Kenwood KDC X993 RF 800a2 Kenwood 4ch Knu Konceptz 1/0 150amp Circut Breaker Big Three Completed Directed Audio Graphite RCAs Kaption Audio SPL1200 12" Sub The pics below range from 2008 until last Sunday This is the first day I brought her Home on a chilly Oct morning 2008 Owned it 2 weeks and choped the pipes and made Duals(updated pic with new tips) http://www.youtube.com/watch?v=rwOf7ZNHEOo Installed a set of 6000K H11 HID: First box I put in this car, Im not sure what it was tuned to, I never did care much for that until I got more into the SPL side of things. A video of me and a friend going in a little grudge match. Car sealed on Dash on Tones. http://www.youtube.com/watch?v=nwcPbCaDKw8

This was my old Golf I owned for about a year untill I traded it for my Monte Carlo CDA-9856 Kenwood 11Band eq Started a Amp Rack: Gutted the Hatch: Amp Rack built: Sub Box: Box completed and installed in the car: Floor made: All Carpeted and read to go:

Going to bring this back to life lol Had it on the Term lab last week. The Rockford 800a2 has not rating for a 2ohm load bridged.....technical it is not stable at 2ohm but it runs cooler then running it at 4ohm bridged. This it 143.7db on the windshield 6 inch over and 3inch up.

I should have mentioned.....No pictured is the bondo process I did today. Its cleaned up and smooth. I only did the face with Bondo since the rest is going to get carpet sometime this week. Thanks for the comment. It is nice a strong for sure. Pounds hard. Its going on the TL this weekend.

Hi All, First time posting, long time reader. Specs: 1.5 before displacment Port tuned to 40 hrz (tried to get 35) Kaption SPL 1200 Rockford Fosgate 800a2