gottahavbass917

I got spare rcas around somewhere ill try that out out. Thanks everyone for help

Sounds like an easy fix to me . I can't believe I didn't think of this.

Read them a couple times was tryin to find a cable to work never thought about splittin rca Just split a normal RCA cable and use one side. Also maybe you should read the manuals. Shows you everything you need to know

Ill check out audiosavings thank you. Talking to the best buy guys was kind of pointless

Thanks for the tips

I was tryin to find a single rca like that any direction u can point me in to find one would help thank you

Anyone?

I have two AQ2200's that i wanna strap together. The 2200 only has one rca output/input for master/slave option. My question would be do i use rcas with y adapters or is there another cable that will work for this. tried searching and asked the local best buy guys. Their response was just use one plug off each side. I really didnt like that idea, any help suggestions on what cable to use would be helpful.

Box is 5cubes at 31 Amp is aq2200 Ssf was set around 32 I gave a bad description of the problem. Sound was cutting out at like volume 10 out 20 sounded like shit. The problem was that my main power wire came loose of the spare batteries. Sorry for wasting time with this problem. Thanks for tryin to help my drunk ass out.

Thanks for the help but I found the problem. It was a power wire that came loose. I prob shouldn't have made this thread being in the condition I was in.

dont know my n2 sounds like it is bottoming out at half volume. i havent clipped what do i do?

What meter does shockwave have?

The mtx 9500 . I have ran both the mtx and w7 and mtx does just as good of job as w7 at lower price

Im from tinley park too not many places with termlabs around here ur best bet is to start calling shops to see I believe there is a place in crestwood that has one idk for sure

Billing information received. I feel like I'm waiting for the winning lottery numbers. No rush to FI, updates will help the wait.

Any updates with production and shipping

mobile phone fail but here it is again http://www.youtube.com/watch?v=vSd_-M2njhc&feature=topvideos

Progress is better than none and it is always worth the wait I might have to find those subs at work and borrow them JK (I work at ups)

Sorry about not mentioning n1's I'm also waiting for n1 for my girls car

patiently waiting for fi to start shipping . It sucks waiting but its always worth the wait in the end ! Just curious on how many people were able to go out and order the n2 and how many are waiting for n3 to be available in a couple weeks?

ya thats what i was asking thanks for the information and tips

Thanks i didnt know that so when most people say there wired down to one ohm there probably not at one ohm and not pushing there amp to full power? And how can you offset this in future set ups

can someone help explain to me why i could use two different ohms for subs and amp? John

Thank you for responding does it really matter that the sub and amp would be at different ohms cuz i dont want to blow my subs or any amp that i buy.