Jump to content

MarioB

S.O.T.M. Winner
  • Posts

    4558
  • Joined

  • Last visited

Posts posted by MarioB

  1. ok so my system has been working fine till today. when i turn up the volume to a certain point the bass with cut out to half way. this never happend before i checked fuses they looked good but i replaced them anyways. im running 2 kicker zx2500.1 and 2 10"kicker solo x any ideas?

    check your batteries voltage as well as all the grounds... Check each battery individually... Let us know what it is...

    i checked all batts. they are all in the mid 13's. i then check my fuses under the hood BAM! found a blown fuse on one of my 1/0ga runs to the back now the question is how can this 300amp ANG fuse blow like that? still check all the grounds? i checked it this morning right before work so i didnt have much time to check all grounds.

  2. ok so my system has been working fine till today. when i turn up the volume to a certain point the bass with cut out to half way. this never happend before i checked fuses they looked good but i replaced them anyways. im running 2 kicker zx2500.1 and 2 10"kicker solo x any ideas?

    check grounds?

    Not yet i didnt think of it till i put it all back together. ima take it apart tomorrow and check all the wiring i thought maybe it was my fuses beacuse i had little ones on it so i thought i wasnt getting enough power to the amps. it just started today to havent had any problems. my volts havent dropped below 13.

  3. GOOD JOB BROTHA!!!!!

    We have reconed the night before for some shows. The crucial part is to make sure the glue is dryed. So if your coming out to the show this weekend they should be more than dry by then if you used CA glue.

    no glue needed slides right in and 8 bolts and your done. but the thing that sucks is they only shipped 1 the other should be here friday i hope so then i can go to the comp and see what numbers i get with full power.

  4. new update i hit a 143.8 still only wired at 4ohm so im only seeing about 2200 watts. need to recone to 2ohms to get my full power. hopefully get up to 146 after recone

    What´s your impedance rise? we wired a ZX to 1 ohm for about 3 months on a friend´s car and it worked great, impedance rise was x3 tho so maybe we were lucky hehe, but maybe you could wire it to 1 ohm for a couple of minutes just to test how loud can you get by reconing the subs :)

    You do have a great alt and nice batts.

    im not sure what it is how can i find out?

×
×
  • Create New...