Nathan @ XSpower

Same dimensions, but some upgrades in design. Upgraded handle and a few more slight design upgrades, but the basics are the same.

First look at the NEW D6500 and newly designed D3100 D6500 D3100 D3100 and D6500

The 3400 would fit, but the posts are reversed. The 5100R will fit in there and the post will match up. Yes you can run a upgraded battery with the OEM wiring.

CURRENT DISCOUNT: 5%

Correct the VCM will bypass the MLA and basically make it useless, but I just wanted to let them know that it can be used with the MLA and they wouldn't have to take it out.

Yes the 14V and 16V will be included in this. All AGM batteries. The D1400 will be $249.00 and the D1600 will be $259.00.

That is a BCI group 65. The D6500 would fit in there fine and give you a big jump in power.

I stand corrected! Just talked with our engineers and they have found a way to allow the VCM to work with the DLA still in place.

Should be about two months.

Yes you could bring your voltage down if you wanted to. It does have safetys built into it.

The VCM is not made to work with a MLA.

Glad to see you got it and everything is going good so far. ***Again just for everyone's info this is just a demo version. The shipped product will look almost just like this one, but there are a few tweaks to it.***

Are you running them under the hood? The 6500 would be the best fit under the hood, but I need your year, make and model of the truck to find out for sure.

Here is the internet pricing for the batteries: D680-$109 D925-$139 D975-$139 D1200-$180 D5100/5100R-$235 D3400-$239 D2400-$279 D6500-$289 D2700-$299 D3100-$349 We are very close to the %5 discount already. Just need a few more batteries sold to get it.

If you can hold off till the first of January then this would be your best bet http://www.stevemeadedesigns.com/board/ind...showtopic=62371 If you would rather go ahead and get it, just give me a call 888.497.7693 x1211

The Explorer will be when the next run is finished (prob about 2 months). PM sent.

We may see if we can get our graphics guru to hook up a banner for everyone to use. We will provide you one either way.

I dont have my guide with me, but I know the 3400 would be plenty enough power for you. I will check on the fitment when I get back in on Monday.

We will take the $50 dollar payment and your full order on Monday. Then we will not charge the remainder of the balance due until we know what the discount is going to be. I will update the First post in this thread with the current discount amount and post it up in this thread.

$203.15

The 14v line with the VCM is going to awesome!

Cool. I cant get my work email from home, so it will be Monday before I can reply.

Let me check on Monday and see what we can do.

All AGM batteries are included. If you are looking at the battery and the terminals are closest to you the + is on the Left.

We have a temporary fitment guide on the site now for the VCM. Go to the site http://www.4xspower.com and click on PRODUCTS. Scroll down to the VCM and click on the VCM Controller and Harness Combo Kit When it opens up click on the "open in new window" trash (just beside of the increase size trash). This is not a very user friendly list, but we wanted to get something up for you to use until after we get back from the holiday weekend. If you have any questions you can post them up or shoot me a PM. I will be checking in throughout the weekend.