-
Posts
4223 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by bcpballer64
-
-
If you could have anything made into a flash drive what would it be? I'm doing research for a school project if the same idea pops up multiple times ill make a poll to vote on the winning drive. If you are the one that suggests the winning idea first as an idea ill make it and send it to you to be yours. Anything at all is eligible for ideas so toss 'em up.
-
nope and maybe!
That would be sweet if you did. I'll be 18 next year so I could fly out to CES I've always wanted to go and especially if you are there.
-
Steve did you smack the bumper wen you were getting onto that flatbed? And r u going back to CES next year?
-
~31-33 hz should sound a hella lot better than 43 hz tuned right? it is a daily and it is a 4th order bandpass.
-
Thanks for the advice guys. Went out back and found this little guy and cut me some port tubes.
-
i have 5 pvc tubes in my box and sound great.
Thats what i am looking for. Thank you very much.
-
All I used in the 90's was PVC ports, works great just round off the ends with sand paper and a router for the face.
Ok, cool.
-
Well i will definatly take that into consideration for my future. I appreciate the advice.
-
Dont use 3" pvc for your port unless you use multiple ports. I used the Alpine spec for a 3" port for my 10" Type R and it made a hell of a lot of port noise. I changed it to a 4" round pvc port and fixed the problem. How many cubes is your box gross, internal dimensions and is this for the 2 subs in your sig?
I have a box that i made for my physics project. http://www.stevemeadedesigns.com/board/ind...showtopic=64923 I have 3 inch tubes in either side right now but i want to lower the tuning and i know that i need a 6" long tube to get it there. I dont have any port noise. It is a bandpass enclosure and the tube is in the front chamber. The ported chamber is 1.8 cubes and the sealed chamber is 1.5 cubes. Each subwoofer has its own chamber. So you dont think that using straight up like plumbing PVC pipe would work?
-
Ok so i have my box finished and installed but my tuning is way way too high. it is tuned at 41 hz. I know that to get it down to 36 hz (where i want it) i need a 6" long 3" diameter port tube. I cant find them anywhere i can only find them in like 4" or 4.5" lengths. My question: can i use PVC pipe for a port tube? I have access to some 3" pvc pipe and could easily get some of it.
-
BTW, if i was having my kid in high school (which I have a freshman and a Senior) I would want them paying off their education by not dabbling with car audio or talking about bass, as there is real no point or benefit
laser, IR, solar, thermal, wind generated electricity is what needs focused on as it is the modern times and the future
I understand what you are saying about the future and the different technologies. I should look into that, i would like to tie it into car audio though. Im not planning on going into car audio after my engineering degree i just would like to do it on the side. Wind energy is huge in my county we have over 400 wind turbines.
-
what was the point of the video
you made excuses all the way through it...
do something cutting edge or with the times. try showing perpetual motion
actually do a solar project or a wind project generating electricity
I actually have a great one but unfortunately patents come to play as I have yet to do it, but I could be rich and shameless and with it you could possibly drive from new york to Cali with 1 gallon of gas, and at speeds of up to 300 mph... seriously
non nuc either
People just wanted to see the box playing, i didnt know what else to say. times? what did you mean by that? U an engineer?
-
Bump for replies.
Please peoples. I need some ideas. Anything you want to toss out there.
-
I searched, maybe I am handicapped though
Walmart Automotive section. I think maybe 12 bucks if that.
-
Here is a video of my first semester project.
Just in case it doesn't work embedded.
-
Aight, and so you're saying you tried to do it and didn't make a copy of it?!?! so the origonal no longer exist?!?!
Please say no!
and BWT I have that scoshe wiring to, did you get it from wal mart with the half farad capacitor?
No i didnt make a copy of it but it will take me a whole like ten minutes to render another animation wheni get back to school. No i got the scoshe wiring from crutchfield when i ordered all of my stuff last year. i have two 8 gauges kits blue power clear ground.
-
Ok I just started 2nd semester my junior year high school. My second semester in Advanced Physics. First semester I dabled in the acoustical side of a box for my independent project. Click here to view the post. http://www.stevemeadedesigns.com/board/ind...=64923&st=0. This semester i have to do an electronics kind of thing. So what should I do? Maybe like a sensor for some interior LED's to make them flash to the bass or something small like that. I am open to any and all suggestions though and I appreciate any suggestions. Also, no videos yet from the box. I havent made it to the store yet to buy some caulking. The plexi window that is on the top and slanted face is letting out too much air. When I put some stuff in the path it almost doubled the volume so yes the box works but not 100% yet. I need caulk.
Edit: Part about vids and box.
Edit 2: I plan on majoring in eletrical engineering with a minor in acoustical engineering so even if you might find it challenging for a junior in high school toss it up becuase I would love a challenge. I do have a base of understanding with circuits and electronics, but by no means am I saying that I know everything. I know i have a metric ton to learn.
I know im qouting myself but instead of a new thread I thought i would add to this. What about a dB meter? Is there anything any of you guys have wanted to have or build small electronics wise? This is a brainstorming thread so any and all ideas please.
-
I CAN! put it on youtube give me the link give me about 15 min I'll have a pic for you that can go on the site.
i would but i was just trying to switch it from a .wmv to a .gif and i fucked it up. im going to have to make another renering whenver i get back to school cause we are out on a snow day today and prolly tomorrow.
Got your PM btw and thanks i might have you do that ill PM you if or when i get it on youtube.
-
Its a .GIF You can search Google for .gifs and see what you come up with... and then there are programs that you can use to make them... There is a thread for a couple of people who make them.
ok so it just has to be a .gif? i have 3d rendering capability at my disposal and parametric modeling (Autodesk Inventor). I made a sub with my custom logo on it and i made a vid of it bumping i want it as my avatar. i will work on it thanks for the info.
-
ARe you talking about your Avatar?
Like the .GIF in mine?
Yes just like that.
-
How do you get a clip for your name pic? i cant figure it out.
-
How many floors up can you FEEL it, I'd be interested to know :hairtrick:
Well thats what i meant.
-
Damn wish i could go!
Ya Indiana to Vegas is a hella trip. We should have gone lol f**k school they can wait.
-
Dude man GL i expect a vid everyday though. R they gonna let you bump all day? BTW watch out for the big silver light support things hanging from the ceiling they were swaying like a mofo. How many floors up can you hear it i wonder?
Flash Drive
in Off Topic - Random, Misc posts - the forum "Junk Drawer"
Posted
Let me re-phrease what i meant a flash drive that looks like something like that. So the only function of the device would be flash drive.