total mayhem

if anything they are very UNDER RATED. They will do EXACTLY what it says and a lil more.

sold

BNIB Orion Hcca 6.5 comp set 6-1/2" HCCA Series Component System Power Handling: Peak: 100 watts RMS: 75 watts Kevlar/paper composite cone Polyester foam surround 1" Silk dome tweeter External crossover with 12 dB high pass and 6 dB low pass filters Tweeter level adjustments Custom tweeter mounting kits Single flat interlaced conex spider with tinsel leads Custom cast aluminum basket Complete with mounting hardware 4 Ohm impedance Copper clad aluminum wire voice coil Neodymium magnet Sensitivity: 90dB Speaker Size 6-1/2" Design 2-way Component System Tweeter Design Dome Tweeter Composition Silk Woofer Composition Kevlar/Paper Composite Woofer Surround Poly-foam Sensitivity 90 dB Frequency Response 45 - 20000 Hz RMS Power Handling 75 watts Peak Power Handling 100 watts Impedance 4 ohms Top Mount Depth 2.2" HCCA 6.2 BNIB only taken out to take pictures 200 shipped obo

sold

sold!

ttt remember OBO!!!!!

Mods please move to WTT section. I apologize

Trading my enclosure from my Suburban 28.5Hx46Wx32D tuned to 34 dual chamber 194-196 inches of port 4 sheets of 3/4 mdf double all around triple on top with flush baffle Its in great condition and gets loud very easy with little power. Have had as much as 10+k to subs in here as well. plays as low as 16hz and I havent gone past 50. MUST BE LOCAL!!!!! WAAAAAAAAAAAY TO BIG AND HEAVY TO SHIP!! Whatever, let me know what you have. will also sell just make an offer.(please dont lowball me)

Audiocontrol Matrix 6ch Linedriver 6-channel line driver provides up to 24 dB of gain (9.5 volt RMS maximum) gray steel chassis with gold-plated RCA jacks top-mounted controls for easy adjustment three sets of balanced inputs and outputs eliminate noise (switchable to unbalanced mode) light indicates 1-, 2-, or 5-volt output, plus overload indicator frequency response: 10 to 100,000 Hz signal-to-noise ratio: 110 dB at full output maximum output level: 9.5 volts RMS (13 volts peak) fuse rating: 1 amp size: 6-1/4"H x 8-1/2"W x 1-3/16"D im getting a new radio and proccessor so I no longer will need this one. 8.5-9/10 visual (small scatches from installatiion nothing more) honestly looks almost new aside from that. 10/10 mech. Its hooked up now. 105 shipped OBO sorry for the pics. best I can get for how its installed. Everything is bolted down so its not the easiest thing to move

as you can see, he had an idea of what he wanted. He just didnt choose the correct amps for his application. He is also changing subs in the future so those CVX's will end up being for sale too.

Because he was origianlly going to use them. Once everything was hooked up he saw that they were not enough power for his application and from that point ran a couple of sweeps to find out his cabin peak and also tuned his mids and highs around the bass. Once these are sold the trunk is being redone and the new amps are going in. The car has been even been moved since this post because the intrerior is still being finished. This is a car club "show car" thats owned by a person who also is trying t get into the spl scene.

My teammate Socal Spl John giving a demo at a show a couple of weeks ago. This mustang is loud!!!! 3 TC15s walled FTW!!

LOL thanks for the bump. At least you admit to the lowball lol ttt!!!!!

why arent these gone??!!!!! ttt!! buy me

took care of ya Eric!!!

Bump

ttt

ttt

ttt

Yep I'm in gardena. Bell isn't too far maybe 20 min or so on the freeway

You have a pm sir!

ttt!! These are obo!! make me an offer!! lets get these out of here!

also this is obo

selling these for a buddy of mine. He just needs more power. 1 hour of play time on them. Just been using them to test his new install. Not looking for trades. 9/10 visual and 10/10 mech. Asking 225+shipping each or 400+ shipping if you buy the pair. •Super D-Class Monoblock Amplifier •RMS Power Ratings: ◦1 ohm: 2000 watts x 1 channel ◦2 ohms: 1300 watts x 1 channel ◦4 ohms: 650 watts x 1 channel •BXi AccuCross™ active electronic cross-over permits full adjustment of: ◦Bass EQ, Subsonic Filter, Low-Pass & Phase Shift features •RCA Input level control permits matching the amplifier input level (gain) to the CD/Receivers output level. Or the Balanced Input will accept BLD Line-Driver levels from 4 to 18-volts. •The Brutus BXi bass remote controls the subwoofer output signal from the drivers seat. •For multi-amp daisy chaining, the RCA line inputs transfer the pure untouched audio signal directly to the line output RCA jacks, bypassing any crossover settings •Hifonics New Illuminated Heat-Sink Design With Blue LED Light Pumps •Hifonics Blue Illuminated Logo •Maxxsonics Illuminated "M" End Panel Logo •Heavy-Duty Ultra-Fi™ MOSFETS •Highly Efficient Super D-Class Amplifier Circuitry With Oversized MOSFET Output •Fully Adjustable Accu-Cross™ Crossovers •±18dB Variable Bass Equalization @ 45Hz •180° Variable Phase Control (15 to 35Hz) •Dash-Mountable Bass Remote Control Included •Variable 24dB Subsonic Filter •Brutus Pulse Wave Modulated MOSFET EXVP (Exponential Vari-Power Supply) •Twin-Turbo Torroid Coil Design •HSMD Hifonics Surface Mount Design •Balance Line Inputs for our 18-Volt Line Drivers •RCA Line Output for Amplifier Daisy Chaining •Gold Oversized 2-Gauge Power Connectors •Dimensions: 16.50"L x 10.39"W x 2.63"H

thanks Ray! all speakers are sold!!