pcummings32
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Everything posted by pcummings32
-
yeah i ground down to bare metal and the xs d 3100 is new and topped off, the under the hood batt is old and could be replaced... i just added new wires and left the existing factory wires as well. i think im gonna start with getting a new batt under the hood and see what happens from there.
-
also i think you should get rid of the dual 4 ohm sub and get another dual 2 ohm sub. then run em at 2 ohms. i guess the obvious question here is why are you trying to run at 1 ohm if you have 2 amps strapped? sounds like a fire is gonna happen if you do.
-
if subs are in the same enclosure and are sharing the same airspace youre gonna have issues running them each on their own amp... being that theyll each be getting a different amount of power even if you use 2 identical amps (due to impedence) the sub getting more power will out do the less powerful sub...
-
also im looking into an alt for my camry... ive got a 300a excessive amperage alt in the astro and i guess i was pleased... i had belt slipping issues in the beginning but got em resolved... any suggestions for a 200+ amp alt for the camry?
-
ill have to check all my connections... i kinda doubt its bad crimps tho. all the wire that i used came out of my astro (which just died on me) but it didnt have any voltage issues. it was doing a 149.3 on music. i understand that i wont see a voltage gain and i also understand that the big 3 only allows more amperage to flow. what i cant figure out is why after running the big 3 ive lost almost half a volt.
-
i just ran the big 3 and installed a XS Power D 3100 in my 2000 camry today and my voltage is only getting up to about 13.9 - 14.0V... before i ran the big 3 and installed the batt it was getting up to around 14.4 - 14.5V... any thoughts?