MACnonsence6

alright when my leads get here ima do that sick of this shit lead slap and having to worry about the leads breaking at the cone if i knew how to re string them from the cone id re wire them all so there was no breaks/

im going to be adding another 3" so theyll have plenty of slack.i only got one spider with this recone. re se from fi. so id stich from to the high rib

they make curved needles why couldnt i do it with the recone already in? then put a drop of ca glue that would leak under and glue the bottom as well

kinda 2 late now they have already be reconed where would i sew them on though the high ribs/ putting a needle threw the spider wont effect it?

i might need to do that all 4 of my leads have broke cause when i did my recone i didnt give them enough slack. and the leads i ordered to fix them where mad small im now odering .80 leads so i gotta eather do that ^ or extend the foam pad thats on there with new ones one each side

where would i find them at?

so i gotta find a foam pad thatll work and ca glue that to the cone

can you ca glue the lead wires to the top rib on the spider with added slack between the ribs?

was gona say ud be screwed if u ripped that lil sticker. not gona lie be kinda funny for someone to post something like this and not care cause its under waranty then realize they just broke the seal so now there beat lol

nope nothing like that in the bios but ik when i was running duel boot with 7 ultimate i had card settings that i could change so if i do run into a problem hopefully that should be able to fix it. looking for a good express or usb soundcard for my laptop. need something amazing anyone used anything that they liked alot?

awsome thanks that was one of the other things i was worried about ima restart my laptop and see

thought amp manufactures wouldnt cover an amp that was opened?

turns out my power adapter wasnt bad so yay lol im running ubuntu atm so i cant check but lets say the 10" 30 pin screen worked but my laptop kept trying to put the 15" screens resolution to it so on the 10 i would only see the middle is there a way to turn resolution down to get it to fit the smaller screen if that made sence? / im in ny as well just way north

fyi i send 800 to my se all day and it loves it

i think i may have older se motors then would u do one with the boot of with a a bic lighter or something to show size? heres mine covered in bondo dust https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/298032_109741265797057_100002835520150_55181_3552734_n.jpg

should be pretty beast. those you can recone with re 05 XXX softparts just saying / pics? wana see the motor and see how much bigger it is compared to my sex motors

my plan to extend it is to buy another cable the one that goes from the board to the screen. that way i have 2 and i have 2 flat ends to solder to and no cable cutting.i really wana use my toshiba though because i already have it. and im kinda do this on the cheap and more of a learning expience over all. my only worry is that i wont be able to get the 10" monitor to work ima look more into it and see if a 30 pin is a 30pin no matter what hopefully if there not the same pin placement i can find diagrams and make it work. might have the money to buy that screen pretty soon sold some older home audio stuff. so a build log will be in progress. prolly start one tuesday as ill have the parts to fix my ap1800. thanks for all ur help throughout this im glad theres people like you here on smd wish there was more. as far as using a computer and getting rid of the head unit that would be pretty bad ass plus with the sound cards u can get you have the ability to set up a pre out for highs mids and lows,/ isnt there a thing out there that boosts inline rca voltage? would that work for your aplication

sex or se? the only expience i have if it is the sex is with the motor i bought a sex motor and reconed it with a se recone from fi on a 12spoke basket. and it gets pretty low and i think dominates compared to everything else ive had but thats just a 12. the older se stuff is soposed to be alot better.

that turned out mad sexy. idk if i fail then ill have to try again. something i really wana do though.

thats where this is starting to feel like it would cost more then it worth. and the power adapter just died for my toshiba may just try and find one of those mini laptops used around town people buy stuff like that new then put in on cl with in a week.woulda be as fast as my toshiba but it would do what i want it to in the car. itunes,stream vids check facebook that kinda thing

what are some good brands of paint,primer and clear?

found a 10" screen with a 30 pin connector http://www.ebay.com/itm/ASUS-EEE-PC-1005HAB-1005H-HannStar-10-1-LCD-SCREEN-LED-/180685674546?pt=LH_DefaultDomain_0&hash=item2a11b49832 would that screen work as it should if i just swapped it with the one i have? not talking housing wise as i plan to mold the screen into my dash but data cabble wise as well as video wise both use 30 pin connectors.

are eclipse guns cheap? / i was planning to use duplicolor paint / so when i paint i shouldnt stop when i reach the end of the car i should backtrack with the gun still spraying?

prep would consist of fixing any dents/ rust and making the place to be painted as smooth as possible right? whats some advice for getting rid of small dents or small places were rust has eaten threw a panel. like in my rear 1/4 panel a spot almost the size of 50 cent piece has been eaten away. with this car new metal isnt really an option as they dont make replacement panels for that part so what would u guys advice i do to stop the rust from coming back ive cleaned it away the best i could with a brush grinder sealed it with primer sealer then bondo to make it flat and flush so then it looks alright for a few months then starts to come back.

im pretty sure theres 2-3 eclipse and a a couple craftsman guns the eclipse are older