Jump to content

stevob14

Members
  • Posts

    14
  • Joined

  • Last visited

About stevob14

stevob14's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. me too, i was looking forward to getting a flex fit smd hat until i added it to my shopping cart to find out it was no longer available :[ Any ideas as to when these smd hats will be available once again?
  2. I have a 08 altima and am trying to decide whether to put 1 18 dd 3518 or 2 12s of the same series. I have ~5-6 cubic feet available space for the box. Any suggestions or recommendations on what I should do .
  3. I heard of the p3000.1 and yes it's the older generation of massive audio. I personally wouldn't buy that amp after researching and talking to people who had experience with it. Every P3000.1 that i've came across has either been broken, or only half the amp works(The P3000.1 is really two 1500s strapped in one board). However, if you have the alternator, batteries, and 0 gauge wires to back it up, it wouldn't hurt to offer him a price. I wouldn't pay over 300 for it.
  4. Thanks for all the help, everything is hooked up and working but I have an annoying engine/alternator noise coming from these two speakers. Anyone have an idea as to why this is happening? I made a good solid ground.
  5. Thanks for the response! Also the amp is labeled Chan 4, Chan 3, Chan 2, Chan 1 going from left to right. When connecting the 2 front speakers to channel 1 and 2 to the amp, do i switch the setting from 4 channel to 2 channel on the amp? Or do I use the "Bridge" label on the amp when only hooking up 2 speakers.
  6. I have a Pioneer AVH-P3100DVD in dash head unit with SWL/SWR, FL/FR rca preouts. I currently have a monoblock amp using the SWL/SWR to power my 1 12 inch sub. I also have a 4 channel amp that is all set up except for the rcas. Currently I want to run the 4 channel amp as a 2 channel amp powering 2 aftermarket speakers in the front. How do I go about connecting the rcas from the head unit to the 4 channel amp. Do I use the FL/FR and run them to channels 1 and 2 rca inputs? Any help would be appreciated! Thanks http://www.sonicelectronix.com/pictures_new.php?id=17373&picture_id=238743&source=ebay (Picture of the RCA preouts on my head unit)
×
×
  • Create New...