-
Posts
2401 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by memphisBred
-
-
What's the highest voltage the 12v batteries should see while the cars running/alternator is charging?
-
You brought up what the problem was DJ. Without your help I'd be on hour 12 checking fuses. It was a easy fix too, which I should have known.
Thank you.
-
Everythings good. I used a bolt/nut/washer to connect the short wire to a 6" piece of 8 awg and was able to get it to reach.
Thanks to Matt @ mechman for that tip and all the members here for the help.
-
What exactly is the fusible link? Where should I be looking?
Also there's three 12v posts on the starter does it matter which one I use?
-
Anyone know where the stock alt wire goes to on a 2001 Explorer Sport?
-
The issue is the stock wire.
-
Ran a new wire from starter to alt post and it's creating big sparks every time I touch the wire to the post.
Seems like straight to the battery wouldn't fix m problem as I have two 1/0 runs from alt to battery.
-
Where does the wire go from the alt charging post?
-
I'd say it's a little smaller than 4 awg
-
Do I need to disconnect the wire before cutting the insulation?
-
What's the best way to lengthen/make the cable reach?
I was hoping to see the cable ran a long way zip tied at certain spots but it looks like it's as far as it will go.
-
Wow I've been staring at it disconnected thinking that was it.
The charging post on my Iraggi was in the same position as the stock and the cable reached easily.
Now the charging post is on the back of the alt and the cable won't reach.
-
Oh and I'm not blaming the alt at all.
I didn't hook the stock wiring up on the new alt. One I didn't think it needed it and two it wouldn't reach. Should the stock cable be reading any voltage. Touching it and a ground I don't get a reading.
-
I have bus bars on the front battery terminals and everything is tight. Grounds are good. All fuses in and out are good. Not really sure where to go from here.
-
Batteries are resting at 13.0. Connections are good. Fuses in the car are good. About to check the ones under the hood.
-
Just installed my Mechman 270a alt with avbm and now I have no power. Door locks/lights/etc. What should I do/check?
-
I went from two AQ 2200's to two AQ 3500.1's and my peak stayed at 42 hz.
-
I'd say 2 5k's. With your voltage you should clamp a nice/similar number.
-
How many and what size subs?
-
That's what I figured. I can't find 70's either.
-
Joe if you end up needing/using 60's I got a couple.
-
He's keeping it. And it's got panels, haha.
-
Get the cubic feet of the box as if the rectangular space was there. Get the cubic feet of the 9 x 6 x whatever length rectangle. Subtract the second answer from the first.
-
Neither is better, I was just wondering whether to suggest one or two amps.
BTL N2 18s Powerbass XTA 5000D
in Member Videos - Host 'em & Post 'em! System Vids / Off Topic
Posted
More power! Looks good.