corteznewbie

25hz with just battery power

and hell it handles 300 amps up to 100 feet. right my front battery at idle reads 14.2v and the rear reads 13.3336. it has to be that crappy soundquest wire. and yes the rear batter was fully charged before i installed it.

well in a week or so i will upgrade from the factory 90 amp to a 136 amp off a 97 my ride is a 96 jeep grand cherokee

only reason i'm redoing it is the shop here sold me a sound quest kit and that stuff aint worth a damn

the local napa carries copper ring style lugs up to 4/0 and like i said its from battery up to my rear battery. but would it be over kill to do the big 3 in 3/0 lol

redoing the wire between my 2 batteries. which would give the best flow. and yes i'm going to use welding cable because my local audio shop wants $6 a foot for 1/0 and i can get 3/0 welding cable for 3.50 a foot. and 2/0 for 3.00 a foot and 1/0 for 2.75 a foot. and all rated to do a full 300 amps up to 100 feet

so which is better the epicenter or the bx 10

http://www.facebook.com/video/video.php?v=10150209826830052&saved#!/video/video.php?v=10150209826830052&ref=mf

i'm going to a local welding shop and getting 2/0 welding cable. it holds 300 amps up to 100 feet. its ugly but it will let the power flow

well since your jeep is basicly same as mine just do the big 3 in 1/0 get a 130 amp alt from a 97 and xtra battery under the passenger side cushion run 4 from there that 8 gauge to thin for that amp

i have the amp all hooked up now and tried a 4 ohm load and whats a 1 ohm load dont notice the difference in sound or power

thanx for the myspace layout

me to and if ya can for facebook

nothen on the amp or deck is maxxed out . i do turn the knob bout half way when i see a hot chick walk by lol just a lil burp nothen long term

thanx p i have my kiddo with me most of the time and my box isnt tuned low hell even my remote i only turn it up bout 1/8 of a turn w/ out mt daughter in my ride. and the volume on my deck never gets past 22 thats where it sounds best to me

then why have a bass boost?

if a amp comes with a bass remote where would a good setting for the gain and bass boost be. not wanting to fight just want opinions. i heard few different stories. right now i have my gain at a 1/4 and my boost bout 1/8 which o my amp is just of the 0db point

i'm asking how companies come up with the power rating at 1 ohm know it all

some brand my local shop wanted me to try a nesa 4000d i never heard of the brand. i do know now they make monitors and what not. and they are promoted threw the kicker reps

so how do i figure out the true power of my amp at one ohm? so far i figured it does 1728 @ 4 ohms by doing the volts times amp but how do i figure out what the out put is at 1ohm?

jizzy jizz jizz lol

i'm using peel n seal on the liftgate on my jeep and i dont have any funky smell. but mines the rubber based stuff not the tar based

its 1700 at four ohms 2200 or so at two ohms and 4000 at one ohm. but i'm not sure if its clean watts or iffy watts. all i know its a new line and i was told it was sister amp of kickers

reason i'm asking is it says they are 600watts rms are the rated that just as a conservative rms and can hold more or that the max