-
Posts
1376 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by bdog
-
-
very functional !!! will it ever come out with the vu-1's needle style display ?
-
rated power? never heard of it
head room is always nice
bimmer havnt seen ya around in a while
-
-
2ohm plus rise your prob seeing 4-8 ohms. not a lot of power
-
pull that one out and see if it is wired properly or if it has a ripped spider and check coils with a dmm.
-
it could be wired out of phaze. or could be box. put up some pics of it
-
oh sorry i dont know where my brain was i ment 90 degree
-
really free to alaska?
-
aero ports can bend by useing 45 degree elbows . this would be your easiest option
-
i just used the tories calculator and watched how to kerf mdf on youtube
-
i missed what the 7.5 did certified on single inputs.
-
Ok, so looks like all i realy need is the speed controller and a AVBM. And yes i know a 12 volt charges at 14, actualy mine charges at 14.4 volts. But i want to run a 14 volt batt, wich will charge at 16.4 volts. This will eliminate the need for all the extra batts, cables, etc. since i have a single cab pickup and run only 2 amps. 1-400 watt rms and 1-1200 watt rms. The main 14 volt batt, putting out around 16 volts should be sufficent enough to run the 2 amps.
No this is not correct. Just because you are running a higher voltage doesnt mean that it will support your amp better.
^^^ correct current/ amperage is more important than voltage. Its better to run at 12 volts with lots of current then to run 14/16 with a lack of current.
-
Don't really understand the 5K #'s at all. Why did the voltage go so low on the un-certified? And the output dropped as well?
6K + on certified, but why would the un-certified get lower?
maybe pushed to clipping created heat and resistance ?
-
sundown packages everything
-
ok where u guys seeing this?
-
great numbers!! in for the cert!
-
-
-
welcome to the forum.
-
i did 3.75 tuned to 30 with 15" per cube of port and it sounds great on rated power
-
now thats a test bank!
-
-
mosfets. easy fix but i would test your system to make sure your wires or xovers didnt cause this.
-
Old school American made rockfords in or out ?
Skar Audio SK-4500.1D Amplifier Dyno (Power) Test Results -- 8,600+ WATTS!!!
in SKAR AUDIO - (READ ONLY ARCHIVE)
Posted
good results!!