Gees97

Wow steve that would look amazing. It's nice to see Rockford spicing it up a bit

Haha that's great

Add me for black ops. Already into my 2nd prestige. Lets make a team. ( tickle dez nuts)

hey when u get time u should text or call me su can hear my sub.and for maybe any ideas.this car is small and i feel really limited.by the way my mirror snapped off the frame while showing a random guy at walmart my system.i used jeezy-hypnotize and 10 secs into the song and my mirror fell on the floor..suction cup mirrors anyone?

i just wanna be able to maintain 14 volts.do u guys think i should get rid of my batts? i have 2 yellowtop batterys(1 in hood and other in trunk)

300 amps? would that be too much for the batterys? im new to this alternatr thing

im running a Fi btl 12 @ 2 ohm on a T2500-1BDCP in a 04 honda civic.the stock amp is 70 amps i believe and i was wondering what size alternatr would i need and what site could i find one on.my mirror already broke off the frame of the car with this amp

Ok but I'm tryn to figure out why rockford released the BD and CP. For the same price. Especially if the CP has more power. Does the CP need more power to run compared to the BD?so in everyones opinion, should I get the CP?

Yea I just want an amp that's gonna satisfy me. I've been through hell and I wanna see what this sub can do. Hey what's the difference between the BD and CP?

OMG LMAO,its soo weird u found me on here haha.yea i still got ur number.my amp vibrated apart.im about to order this rockford amp but its 500 watts above the rms for my sub.i was told i could set my gain down but i wanna make sure before i spend over a grand.i gotta hear ur truck sometime

DVC 2 ohm 1000 Watts RMS x 1 @ 4-Ohms 1800 Watts RMS x 1 @ 2-Ohms 2500 Watts RMS x 1 @ 1-Ohm Two amplifiers in bdSYNC configuration: 5000 Watts RMS x 1 @ 2-Ohms General Features 0°/180° Phase Switch 1/0 AWG power/ground connectors 24dB/octave crossover Audiophile grade speaker connections Infrasonic filter LED Signal/Power Meters - monitors signal & voltage with simulated VU needle MasterSync - allows 1 amplifier to control an array of amplifiers MOSFET output stage MOSFET power supply PowerSync - allows 2 amplifiers to be "strapped" together RCA pass-thru General Specifications Efficiency (average): 87% @ 4-Ohm, 86% @ 2-Ohm, 75% @ 1-Ohm Crossover Controls: Low-Pass (LP): 35Hz-250Hz @ 24dB/octave Butterworth Infrasonic: 12dB/octave Butterworth, -3dB @ 28Hz Tone Controls: Bass: 0dB to +18dB @ 45Hz Signal Input: 1 RCA pair Signal Output: 1 RCA pair Power Input Connector: Block Power Wire Gauge: 1/0 AWG Speaker Output Connector: Block Speaker Wire Gauge: 8 AWG to 16 AWG Heat Sink Type: Cast aluminum Cooling: Convection Remote Controls: Optional Remote PEQ (overrides built-in Punch Bass) Visual Indicators: Power (Blue LED) Thermal (Red LED) Protect (Yellow LED) Output -00dB to +2dB @ 11 steps (Blue LEDs) Battery 9VDC to 16VDC @ 11 steps (Blue LEDs) bd Circuit Topology Class Frequency Response: 20Hz to 250Hz +/-0.5dB Dimensions: 2.14 x 8.14 x 21.875 (in)

my sub is a 2 ohm

but what do u mean? my sub is a 2 ohm. the stats say that the amp is 2500 rms while my btl is 2000rms.im confused about what u said with 1 and 4 ohm

I currently have a Fi BTL 12" at 2 ohms and I had a power acostik 5500bamf amp that died yesterday.everytime id turn it up or hit a bump my bass would cut out.and the amp protection light would come on.so i opened it after checking all my connections and noticed one of the capacitors vibrated loose.SO i was looking into amps and i saw the Rockford Fosgate T2500-1bd. does anybody know if id be able to run this ?