[sundown neo pro audio distance test in my mustang]

tell me what you guys think!

[DC Amplifier PRESALE 15% OFF for LIMITED TIME ONLY]

2 5ks and a price for 1 9k shipped to 53511

[Ring terminal question...]

if u already have terminals then u can always use a drill bit and make them bigger I done that before on late night installs,

[i want moarrrr!]

Right now we don't have anything bigger for the v-6 Mustang. We do have compact Denso units that you could mount as a secondary to help increase your charging amperage. I would recommend finding a skilled fabrication shop in your area and discussing adding a second to your vehicle with them.

Can you explain to how to these Denso units work??? And also I will do that as well

[i want moarrrr!]

Currently have your 270 unit for my 4.0L v6 2005 ford mustang but im walling it added lots of power and batts, so ima need a bigger alt, im fine with losing amperage on idle

for the end of the build it will be 4 aq3500d.1 and 12 d3100's and 1 d3400 under the hood, no rush just want to know what my choices are for this, I know it will be a custom unit nd im willing to pay extra for it =D

[crescendo XST2 Supertweeter ?]

selenim st200s are pretty much the same tweeter bro just couple minor changes of course run those instead

[cc1 help]

Thanks! See you in Indiana hopefully?

[cc1 help]

So I don't turn on the 10x button on my 100.4d? And turn it all the way up??

[cc1 help]

Bump

[1/0 OFC, 4/0 , adapters, rcas, tech flex , etc]

I want that 1/0 tech flex all of it to 53511

[cc1 help]

bump...

Nobody knows??? I'm sure I don't have a defective cc-1 I mean it could happen but I find it very unlikely since they hand test every single one, what could be the issue im having, I don't want to throw it away or waste more money and a different product to adjust my crossovers

[Cheapy 4 channel rcas.]

I have some cheap ones, pm me on how u going give im not looking for much of a profit as long as im not loosing money its urs

[cc1 help]

no, that's incorrect in what im trying to say I follow all the steps I believe up to maybe 8? Where it says turn headunit volume up until it has a green signal light because if it's red that's to much and I have to lower it, so I did that but it tells you, that your amp has to be on full pass when you are doing this everything from that point works 100% then it says turn to lpf and press read and start calibrating, well my issue is when I flip the switch to lpf the signal light turns back off so now I can't tune it

[cc1 help]

I have no reason to use the hpf setting on the amp I have 4 mids to two sets bridged on each channel, I haven't touched the hpf since I bought it and it the correct tone its on track 22 which is 5,000hz test tone I mean all goes fine it read signal in a green light but once I flip it to log the signal light goes away and I try to turn up the hi volume to unclipped Max and still nothing

[cc1 help]

I have done that

[cc1 help]

Well I tried to calibrate my low pass filter, i follow every step that the manual said but once i change the switch on my sundown 100.4 from full pass to lpf the signal light turns off, and when i keep it on full nd click read it says on turning down but i do and it does not change what's so ever, any idea on things im not doing incorrectly?

[sundown neo pro audio problem]

zap a gap medium ca+ glue think it's good enough?? To put the dustcap back on?

[sundown neo pro audio problem]

because nobody was specific on type of glue I have some left over on a recone I will use it thanks nate

[sundown neo pro audio problem]

Bump u think goop from menards is fine? Or maybe some type of super glue

[sundown neo pro audio problem]

What kind?? And I just hooked it up and it sounds kinda springy like idk hard to explain, kinda like I can hear coil?? I mean I tuned it correctly subsonic is at 71z and lpf at 5,000

[sundown neo pro audio problem]

Well while I was mounting my 8s I noticed on of them the dustcap is lose what solution do u have to place it back

[2 AQ SDC 2.5 12's (Repair)]

sorry im mobile it was typo I do want the pair lol,

[2 AQ SDC 2.5 12's (Repair)]

One me the shipping on these to 53511 my girl needs alil extra bump in her new car

[Soundman car audio]

the stuff we show is exactly what the customer picks. we ave some pretty high end installs throughout the years, but a high percentage is pretty typical clean installs. My goal is to show how a good shop runs. and of coarse we sprinkle in some of our silly antics. glad to hear you're watchin.

Never knew u were even a member of smd forum??? Lol but looks good the stuff u do, can tell u guys are pretty much sq guys

[DC Price Reqest Thread]

I want 4 12inch XL woofers with carbon fibercaps 3stiff spiders 1 medium spider