sundownz

Maybe a smidge

Yes, dual power and ground. Testing so far: I got 6900 @ 1.3 actual on 17.9v rest. Did not measure voltage drop. You can get close to 8k out of it with a rise closer to 1 ohm. With a rise to 2.12 I still got 5290 out of it. --- On 12v system: 3100 @ 1 ohm nominal with actual rise to 2.67 ohms (Drop to 13.6 volts) 4910 @ 1/4 ohm nominal with actual rise to 0.71 ohm (Drop to 11.6 volts) I'll be doing more 12v testing to include 1/2 ohm nominal testing when I get my Jeep put back together (changing it over to 12v). The above was done on two Powermaster D3100s in Derrick's Explorer. Resistive testing @ Factory = 5200 @ 14v @ 1 ohm --- All clamp tests done a full ~6-7 seconds into the burp on my Extech Power clamp : http://www.extech.com/instrument/products/...399/380976.html

I am going to try and get my case tooled up - if not the first then the second run will get it.

Nuff' said (or pictured for that matter)

FYI... ETA would be October if we did the money in by end of July deal.

Need to look closer Zade

Indeed!

Lets say if you had to pay by the end of July to get in on the pre-order... who would order one ?

We have done some testing on it on both 12v and 16v I am quite pleased with it.

Maybe I'll post pics later

So... who would do it ? Lets say if this amp was a full 1 dB louder than even the SAZ-3500D on 12v @ 1 ohm... and the 3500D was already 1 dB louder than the 3000D. Maybe it's already been in testing for a while So we are talking ~2dB gain from the SAZ-3000D on this bad boy. Pre-Order price would be around $1200 or so shipped. Lets see a show of hands.

I got word they should hit Charlotte customs around the 16th of this month Get your orders in now if you want some!

On a sub or on speakers ? On speakers the current draw is pretty low with an HPF on.

I think that is the biggest output section explosion I've ever seen.