michigancapri92

i have a set of orion cobalt series components 50 WRMS at 4 ohms i will be runnign a second set to run on my rockford p400-1 since each channel can support 100WRMS at 2ohms and so far i love them i need to work on the doors because the bass is lacking but overall i have thrown alot at them with no problems

the box has ports going from top to bottom all 3/4" and then another 3/4" on top covered in vinyl then i have rubber washers on bottom. amp is p300-1 punch and those things i hear are GREAT with cooling. would that setup be ok when i decide to upgrade to possibly Fi.SSD 10s ?

I have my subwoofer box and i am using another piece of mdf and rubber spacers to mount amps on top of box would that be ok ?

i know that but if i was to use them could i just wire the power and ground in parallel to them like the batteries in pic above. BTW i love the picture when i can afford new batt and get more power i will do that.

how much average is like a 150 amp alt ? and would that be enough power for a 400watt rms 300 watt rms and add little more wiggle room for upgrade later ?

well i got both caps for 23 dollars new at best buy there are just 1Farad caps no volt meter i already have a battery in the back relocated from the front optima red top and i have been using one and it made a big diff in voltage drop. i did some reading and if i wanted to ad another battery i would have to get another red top and would that put more strain on the charging system than 2x1farad caps ? let me know if it wont hurt my little 70 amp alternator, if i could upgrade the alt i would but no one makes upgraded alts for mercury capri XR2 if i was to get another battery am i correct on it having to be a red top since that is what i use now ? and how would i go about wiring it up next to the stock one ?

you can never go wrong with 4ga wire !! i only have a 400watt rms and 300watt rms amp and i still run 4ga ... never hurts and never have a problem with voltage drop or heat

Ok so I have two amps and two caps and was wondering if I could wire the caps in parallel grounded to battery and amps grounded to the chassis would this work good or is there a better way ??? Using all 4awg wire and would I need fuse between caps ??

angry birds is a must !!! LOVE THAT GAME !!!!

ok so i need an alarm system that is pretty basic dont have powr locks dont need remote start just need one that has proximity sensor tilt sensor and glass break sensor and dome light one just need an alarm with the ALARM features no locks or start ect.

that's who i go to !!! he has the computer on the desk !!! i alway by my wire terminals from him ... seem to be a good price and good quality ... i go to the taylor one. and is rex the one that has the little TV in the stand and he is right by the entrance always tries to throw in a set of tweeters on every deal .... alot of those people i dont like ... soundstation is good i go to them sometimes ... dont trust there work at soundstation II but they sell speaker box carpet so i go to them.

ok so my MECP basic is scedualled for nov 1st ... *nervous ... and i have done a few installs to people and i wana start makign a portfolio to show future employers what i have done to showcase my talent and was wondering what i should put in it ... just the finished product or progress let mek now if anyone else has done this any advice is good advice !!!

thankfully i have a table saw ... just found out we had one ... been in our garage for 15 years and i had NO IDEA ... LOL think i might buy a circle jig for the router also !!

i usually go to the guy that has the computer for sale as well ... he has all kinds of wire terminals for good prices ... dont know who the asian guy is ><

what entrance is he buy and are you talking about the the one in taylor or the other one ?

that carpet looks AMAZING !!! great job on the box ... i will be building my second box ever first ported box hopefully i have the same luck as you do :-)

that is true i do sometimes go to places and act dumb to see what they will say ... this guy swears on the hand of god that lanzar is the mother of mothers ......

which one is the asian guy ? and i dont want a 1200 watt amp i have 2 150 watt subs and i want the Rockford fosgate to flow through my car has to match the 4 channel :-)

so i was at this local flea market Gibraltar trade center just checking out the local car audio places asking around for a Rockford p300-1 ... this guy there decided to tell me that, that amplifier doesn't have enough power to power my 2 p1 10s that it would get WAY to hot and that i should buy this 1200 watt amp instead .... he lost my business because i told him all i wanted was the 300-1 it pushes out more than 300 and that is RMS value he was trying to sell me a powerbass 1200 watt amp because it was MUCH BETTER than the 300-1 and that amp would OVERHEAT from the power strain ...... >.< i dislike people like this. anyone else have stories about people who think they are smarter than you and that your just an ignorant costumer ?

when you gona finish this up we wana see moar pics !!!

decided that im going to go with all legacy speakers !!! legacy 15" subwoofer 45$ legacy 10" subwoofer 15$ legacy 6.5 13$ and pyle tweeters 2$ pair going to be the polished turds of all home audio LOL !!! going to be 4 towers 2x 15" and 2x10" 2x towers 4x 6.5 6x tweetz hooray for boredom

and shits and gigs

found some pyle for 92 dollars then the 10s are 15 dollar legacy 6.5s are 13 dollar pyle and tweets are 2 dollar a pair pyle horn tweeters .. i litrally want this to be the cheapest i can make it for the purpose of a polished turd system :-)

what are some super cheap 18inch subwoofers ... looking to build a computer system with 4 towers two with 1x18 2x 10 and 2 with 4 6.5 and 8 tweeters ... going to make it as cheap as possible what are some suggestions ....

rockfords website sais that the p400-4 pushes Dynamic Power (PVC/PowerCube® Measurement) Front Channels 86 Watts x 2 @ 4-Ohms 0° Res 144 Watts x 2 @ 2-Ohms 0° Res Rear Channels 85 Watts x 2 @ 4-Ohms 0° Res 142 Watts x 2 @ 2-Ohms 0° Res