Jump to content

bass_stalker

Members
  • Posts

    3670
  • Joined

  • Last visited

Everything posted by bass_stalker

  1. what all can this do, i saw it said something about an external eq,
  2. holy crap that is a beastly looking 10
  3. . it did it when i left at 6 this morning and the engine was cold then. and i'm not sure how cool the engine was when i left school at 11:15 but it did it again then so i would say its mostly when the engine is cold, the temperature today was probably in the 70's i also noticed it was a power tech i6 4.0, i'm not sure if its a different engine than a regular Cherokee, but it was a government vehicle
  4. i have no clue on that. about two weeks ago i ran some sea foam through it, i changed the cam shaft sensor about 3 weeks ago because that was the error code it was showing last time, and it had an oil change and air filter change about 2 months ago. i have no clue on how old the plugs are so i definitely need to check them. here's a short video of it running and of starting it
  5. here's what I'm wondering, i was reading that its possible that the fuel pressure regulator could be going out, if it was going out would it cause the engine to run badly or only at start up. i,ll try to locate the spark plugs and take a look and test them out, and it cranks just fine, the starter isnt locking up or anything like that and the battery isnt weak. and i'm pretty sure its not a compression issue because everything sounds fine and its got ample power while running, also i don't have any fuel in the oil or coming out of the exhaust
  6. havent checked them but i dont think thats the problem, besides i dont even see where they are at. it always starts on the second try though
  7. ok i have a problem with my jeep not starting sometimes. it cranks over and it wont start then i get a check engine light, then ill turn the truck off and try to start it again and it starts but it will idle rough for a few seconds. after that it runs fine i haven't been able to get the light checked. but the last time it did it i replaced my camshaft sensor and it fixed it, so i'm going to rule that out. what else could it be though, ive sea foamed it already so i don't think its clogged injectors or anything so any help would be apprciated
  8. awesome based right out of Metairie Louisiana, about 2 hours away from me
  9. yeah the other thing with c.l is the bs claims like hitting a 210 on 1 vr3 6.5 on a sony xplod amp
  10. this is like all the people that say 300 dollars is too much for a limited edition Xbox slim with a new 320gb hard drive and two matching controllers pretty much everyone wants a deal and some people are just ignorant. or they just don't have the money to buy it. for selling used stuff i would just take like 20 or 30% off of retail depending on condition and age or rarity.
  11. that line shouldn't have been energized in the first place, once the lines fall an in line box cuts the power, normally it is set to send three pulses of current, if it detects problems after those three pulses it kills the power until it can be reset, otherwise if maintenance is being done on the line it would be set to one shot where if the line arcs or anything it would kill the power. alternatively if it doesn't have the newer computerized system it should still have switches. if the line would fall it should draw too much current and throw the switch off.
  12. well what single din flip radio would you recommend for about $500
  13. did your unit have the usb input also?
  14. also do the clarion units need a relay or can you just ground them
  15. i'm looking at this clarion when i get some extra cash. are their navigation units anygood? http://www.audiosavings.com/products/In-Dash-Car-Monitor/Package-Clarion-NZ500-7-In-Dash-DVD-Player-Navigation-Bluetooth4GB-USB-Stick/NZ500---PNY4GB.aspx?item_cd=NZ500---PNY4GB&cat_cd=In-Dash-Car-Monitor#tab5
  16. bump i really need to get this gone
  17. Idk if it work with this foam, in my familys orthopedic handcraftshop we use 2 component foams to build cosmetics for prothesis. And the clou is if you mix a shot of a and a shot of b and than spit in it and stir it 2 or 3 rounds it comes up much quicker than normal and the expanded foam gets a size 5-7 times bigger than without spitting. idk if it would, i doubt it though this foam is used to set telephone poles and stuff like that. it gets hot enough to produce steam if there is water in the hole
  18. ah ok i didnt see it was going in a honda chunk what i said lol
  19. when i said that i meant the xs 3400 as a primary battery if he could fit it, which would be good up to 2500 watts.
  20. right the big three is usually one of the first upgrades you would d. when you do the big three, make sure you use a good 0gauge wire and crimp/ solder your terminals good
  21. anything over a thousand watts would get an upgraded battery like a d3400, when you go to 2000 watts i would add another battery just to have a bit more reserve, assuming you have an alternator to support those batteries
  22. i thought it was used to fix broken radios
  23. post up anything you have of things being misused, IE somewhat safely but just stupid or for kicks
  24. two positives and 1 negative I'm guessing?
  25. not a problem I've learned a lot from this site and its always good to help people out
×
×
  • Create New...