Jump to content

bigkevy

Members
  • Posts

    89
  • Joined

  • Last visited

Posts posted by bigkevy

  1. i would say on the first picture id use a sawzall or a jigsaw. i also used a dremel with a little cut off wheel and it worked but slowly. i would only do that lip though and not go too much into that brace. in the second picture i would use a dremal with the cut off wheel. you need something small enough to get in there and be able to control it.

  2. i was thinking of going all rf power series. id have the t1692 in the bottom of the door and then 2 or 3 1652s towards the top of the door. this would be on both sides obviously and then probably 2 1652s on each side in the back seat area, so id probably end up doin 3 t400.4s its all going in a mustang, kinda goin for the WOW factor

  3. thanks for the info. ive always really just done subs and never really thought about the mids and highs until this new build, so as much as id love to get the 360 and all its cool features i think i would be in a little over my head at this point. if im tryin to get loud and sound decent then would the eq work? or would i really need to go with a xover and processor too?

  4. ya. im not to skilled in photoshop so i decided to keep the drawing simple, but there will be a few more turns and corners in it. but ya the thinner part will be in the trunk.

    im not sure if its the right spot to do it but can anyone give me a run down on how to strap 2 aq2200s together?

  5. hello,

    im wanting to build a box for 2 18" btls.

    this is what i have came up with

    box-2.jpg

    1ts about 13.8 ft^3 net volume, the port area per foot is 14.5 inches squared with 200 inches of port area and tuned to 32hz.

    will this sound pretty good? it will be just a daily set up powered with 2 aq2200s and sufficient electrical upgrades

×
×
  • Create New...