meade916

My XS Power 12v Titan 8 S5 4800 arrived! Thanks for the fast shipping Showtime! This is JUST for the engine and other factory accessories. The rest of the system is on the 14v S6's in the back. I quick charge..and i mean QUICK! these things are fast!

the connector (aka short circuit lol) shuts off the pesky battery light! CHYEAAAAA im in! lol

that is it for today! More tomorrow i hope!

more drilling/tapping into the frame for these 5/16 x 18 stainless allenhead bolts. The step down box is VERY secure! This 16ga Stainless is solid as a rock bent in this configuration. The base of the step down box also helps it's rigidity some too.

this will be a great spot! drilled/tapped using 8-32 Stainless allenhead bolts.

believe it or not, this thing was strong even made of cardboard. It has perforated lines so i know where to bend it and it still didn't rip. This seems like a good spot. Just need to turn this into metal now. I will need a way to mount this to the metal bracket. I made this baseplate and bonded it to the bottom of the step down box. After that i drilled and tapped the bottom so i can fasten it in place once i get it in it's spot.

time to run some wiring..but before i do that i need to put this step-down box some place. Skyhigh Car Audio 2/0 and 4/0 cable ready to go.

no more pesky battery light! What the fork? haha

my “test bench” today. 16.3 volts for the system stepped down to 13.5-14v for the vehicle and accessories. Gotta make triple sure everything is good before i put anything in the Caddy. I ran all the stock accessories at the same time at about 100a for 4-5 hours. Watched the temps...the fan cooled the step downs nice!

so far so good.

time to start wiring. early in the morning on a sunday...a little chilly out. Time to add bus bars.

Should look good under the hood when i am done! I have more i want to do to it though More pics tomorrow.